Invacare IIJR manual Adjusting Captains Seat Armrests, Procedure Arms, Height Figure, Angle Figure

PROCEDURE 4 ARMS

A R M S

Positioning Flip Back Armrests for Use

1.Make sure the flip back armrest release lever is in the UP (HORIZONTAL) position.

2.Install the flip back armrest into the front arm socket.

3.Lock flip back armrest by pressing flip back armrest release lever into the DOWN (VERTICAL) position.

4.Lift up on flip back armrest to make sure the armrest is locked in place.

5.Repeat STEPS 1-4 for opposite flip back armrest, if necessary.

6.Repeat STEPS 1-5 for opposite armrest, if neces- sary.

Height (FIGURE 4)

1.Remove the socket screw that secures the armrest to the seat frame assembly.

2.Adjust the armrest to one (1) of four (4) positions.

3.Reinstall the socket screw that secures the armrest to the seat frame assembly and tighten securely.

Adjusting

1.	Unlock top of flip back armrest by pulling height ad-
	justment lever into the UP (HORIZONTAL) position.
2.	Adjust top of the flip back armrest to the desired height.
3.	Lock top of flip back armrest by pushing height ad-
	justment lever into the DOWN (VERTICAL) position.
4.	Lift up on flip back armrest to make sure the armrest
	is locked in place.

Height

Adjustment

Holes

Seat Frame

Assembly

Armrest

Socket Screw

5. Repeat STEPS 1-4 for opposite flip back armrest, if

necessary.

FIGURE 4 - ADJUSTING CAPTAIN'S SEAT ARMRESTS -

HEIGHT

ADJUSTING CAPTAIN'S SEAT ARMRESTS

Angle (FIGURE 3)

1.Lift-up the armrest.

2.Loosen the jam nut.

3.Adjust the socket screw up or down to the desired arm angle position.

4.Tighten the jam nut.

5.To determine the same angle for the opposite arm- rest, count the exposed threads after the jam nut has been tightened.

Armrest Socket Screw

Jam Nut

Count Exposed Threads

FIGURE 3 - ADJUSTING CAPTAIN'S SEAT ARMRESTS -

ANGLE

28