Invacare IISTANDARD, IIJR, IIBASIC, II250 SERIES manual Removing The Removable Footboard Plate

PROCEDURE 3 FRONT RIGGINGS

F R O N T

R

I

G G I N G S

	DETAIL “A”
Height Adjustment	Flat	Nut
Bracket	Washer
Caplug
Washer
		Two (2) Large
		Washers

Mounting

Screw

Caplug

Cap

Footboard	Support Tube
Bracket

PREPARING REMOVABLE FOOTBOARD FOR WHEELCHAIR TRANSPORTATION (FIGURE 12)

Removing The Removable Footboard Plate

1.Depress the push pins on the two (2) support tubes on the removable footboard plate.

2.While performing STEP 1, grasp the removable footboard plate and pull it away from the two (2) sup- port tubes on the removable footboard mounting brackets.

Installing The Removable Footboard Plate

1.Align the two (2) support tubes on the removable footboard plate with the two (2) support tubes on the removable footboard mounting brackets.

2.Push the two (2) support tubes on the removable footboard plate onto the two (2) support tubes on the removable footboard mounting brackets, until the push pins release into the adjustment holes.

WARNING

Makesurethepushpinsarefullyprotrudingthrough theadjustmentholesBEFOREusingthewheelchair. Otherwise, injury or damage can occur.

DETAIL “B”

Footboard Bracket	Flat	Nut
	Washer
		Mounting
		Positions
Height
Adjustment
Bracket
Threaded
	Arm

NOTE: Only MWD footboard bracket shown for clar- ity. The footboard bracket on the FWD model adjusts in the same manner.

FIGURE 11 - ADJUSTING THE

REMOVABLE FOOTBOARD HEIGHT

3. Make sure the push pins are completely released.

Pull Removable	Removable
Footboard Plate Away
Support Tube	Footboard Plate
Removable	Push
Footboard	Pin
Mounting
Bracket
	Adjustment
	Hole

Support

Tube

NOTE: Bottom view of wheelchair/footboard shown for clarity.

FIGURE 12 - PREPARING REMOVABLE FOOTBOARD

FOR WHEELCHAIR TRANSPORTATION

26