Invacare 1171880 user manual Remove Back Stop Insert

7 ARMS

Plunger Pin Back Stop Insert

Split Ring

Back Release Cord

FIGURE 1 Disconnect Back Release Cord

5.Remove the rear seat upholstery mounting screw and short mounting screw (FIGURE 2).

6.Remove the back stop insert from seat rail (FIGURE 2).

7.Perform STEPS 5-6 on remaining back stop insert.

8.Secure the back stop insert weldment to the armrest socket, in the orientation shown, with two mounting screws, four washers, and two locknuts. Tighten securely (FIGURE 3).

9.Perform STEP 8 for remaining back stop insert weldment/armrest socket.

Back Stop	Rear Seat Upholstery
	Mounting Screw
Insert

Short

Mounting

Screw

FIGURE 2 Remove Back Stop Insert

Part No 1171880 37 Invacare®Top End Reveal™Wheelchair