5 SAFETY INSPECTION
❑Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.
❑If caster flutter occurs, tighten fork stem nut to set needed drag.
❑Inspect tires for flat spots, damage and wear. Replace as required.
❑If pneumatic tires check for proper inflation.
Inspect/Adjust Monthly
❑Ensure wheel locks DO NOT interfere with tires when rolling.
❑Ensure that the casters are free of debris and caster assembly fastened tightly.
❑Inspect upholstery fastening flaps to ensure they securely latch.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Ensure camber bar mounting clamps are securely tightened.
❑Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑Ensure that folding back is fully locking into place when back is open. Adjust as needed.
❑Ensure wheel bearings are clean and free of moisture.
❑Ensure fasteners holding seat upholstery are all tight. Tighten and/or replace fasteners as required.
Inspect/Adjust Periodically
❑Ensure wheelchair rolls straight (no excessive drag/pull to one side).
❑Ensure wheel locks are easy to engage.
❑Ensure that the casters are free of debris.
❑Inspect seat and back upholstery for rips or sagging.
❑Ensure camber bar mounting clamps are securely tightened.
❑Ensure no excessive side movement or binding when lifted and spun.
❑Inspect handrims for signs of rough edges or peeling.
❑Clean upholstery and armrests.
Part No 1171880 | 27 | Invacare®Top End Reveal™Wheelchair |