Stylus Photo R300/R310 | Revision A |
ADJUSTMENT
REQUIRED
When replacing the following parts or components with new ones, apply specified grease in its adequate dose. (Refer to Chapter 4 "MAINTENANCE")
Cam, CR, Right/Left
CR Guide Shaft
Holder, Scale, Right/Left
Pulley, Driven Assy.
When having removed or replaced "Carriage Unit" or "CR Guide Shaft", implement the adjustment in the following order. (Refer to Chapter 3 "ADJUSTMENT")
1.PG Adjustment
2.First Dot Adjustment
3.PW Sensor Adjustment
4.Head Angular Adjustment (Only "Carriage Unit")
5.
6.Offset Input for CR Motor Calorific Limitation (When Replace "CR Guide SHaft")
When having removed or replaced "PW Sensor", implement the adjustment in the following order. (Refer to Chapter 3 "ADJUSTMENT")
1.PW Sensor Adjustment
DISASSEMBLY AND ASSEMBLY | Disassembly | 62 |
