Stylus Photo R300/R310 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 73
Set all of the gears on the shaft of "Pump Frame" correctly,
and then check if they move smoothly.
Make sure that the ink tube is not squashed or pressed.
Install the ink tube to the grooves (x2) at the bottom surface
of "Cap Frame".
Figure 2-53. Installing Point for the ink tube
Reinstalling "Ink System"
Check if "Pump Assy." is correctly secured.
Do not let "Lever, Change", "Combination Gear, 27.2,
19.2", "Spur Gear, 27.2" and "Combination Gear, 20.82,
24" drop and break them.