Stylus Photo R300/R310 | Revision A |
2.3.14 Removing Paper Guide, Upper
External View
Paper Guide, Upper
Torsion Spring, 122.2
Parts/Units which should be removed before removing "Paper Guide, | |
Upper" | |
Paper Support Assy./Housing, Upper/Housing, Middle/Main Board Unit/ | |
ASF Assy./Holder, Shaft Assy. | |
Procedure for Removing | |
1. | Move "Carriage Unit" to the home position. |
2. | Put a transparency between "Paper Guide, Upper" and "Roller PF Assy.". |
3. | Release "Torsion Spring, 122.2" (x3) from the hook ( 1 : 1 each) of "Frame, |
| Main", then pull it out to the front. |
Roller PF Assy.
Paper Guide, Lower
Transparency |
|
2 | Hooks |
| 1 |
| Hook |
Rib | Rib |
| Dowels |
4. | Release the hooks ( 2 : 2 each) which secure "Paper Guide, Upper" (x3) to |
| upward. Then, release the dowels (2 each) while slightly holding up "Paper |
| Guide, Upper". |
5. | Press down "Paper Guide, Lower" and pull out "Paper Guide, Upper" (x3) to |
| the front while stepping it aside the ribs (2 each) of "Frame, Main" |
There are 2 types of "Driven Rollers" of "Paper Guide, Upper".
Install them as shown in the following figure.
Figure 2-36. Removing "Paper Guide, Upper"
Driven Roller (Grey) 
Driven Roller (White)
Figure 2-37. Installing Position of "Paper Guide, Upper"
DISASSEMBLY AND ASSEMBLY | Disassembly | 63 |
