EPSON Stylus Photo R300/R310 Revision A
TROUBLESHOOTING Troubleshooting with LED/LCD Indications and Status Monitor 3 Message 10
Error before ink
replacement Cleaning Blink
Ink Cartridge cannot be recognized.
Yellow: T0484
For best result, use genuine EPSON
ink.
This error is detected when replacing the Ink
Cartridge, if the new cartridge is defective.
Ink Low Condition Blink (Blink of Ink Cartridge Icon)
Note :
Printing operation can be performed until it becomes ink
end condition even after the error messag e is displayed on
STM3. However, the Head Cleaning operation may not be
performed due to the Ink Low condition.
This error is detected when the ink consumption
reaches about 90%.
(Note)
When the Ink Low Condition is detected, the
Maintenance LED will blink. The printe r will
continue to keep this LED stat us even if a new
Ink Cartridge is installed in the Ink Cartridge
replacement position. However, this LED status
will be reset (LED off) when "Carriage Unit"
returns to the home position.
Table 1-3. LED/LCD Indication and STM3
Printer stat us Maintenance
LED indication LCD indication STM3 message Condition for error detection