Stylus Photo R300/R310

Revision A

„ Screw "Printer Mechanism" and "Paper Guide, CDR" in the order as shown in the figure.

„Check if "Waste Ink Tube" is secured in the groove of "Housing, Lower", then make sure that the line mark on the tube is facing to the left. (Also make sure that it is not twisted.)

Left

Ink Tube (Image)

Groove of

"Housing, Lower"

Front

ADJUSTMENT †

REQUIRED

Figure 2-45. Position for installing "Ink Tube"

„Make sure that "Waste Ink Tube" is not squashed or pressed.

„Check if "Cap Assy." moves smoothly.

When having replaced "Waste Ink Pads" with new ones, implement the following adjustment. (Refer to Chapter 3 "ADJUSTMENT")

„Waste Ink Pad Counter

DISASSEMBLY AND ASSEMBLY

Disassembly

67

Page 67
Image 67
Epson R310 service manual Left