Invacare 1171880 Removing/Installing Foldover Back Upholstery, Removing Foldover Back Upholstery

8BACK

8.4Removing/Installing Foldover Back Upholstery

￿ WARNING

ALWAYS perform these procedures in the presence of an assistant. The position of the footrest, camber tube, seat angle, back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs stability. Any change to one or any combination of the five may cause the wheelchair to decrease in stability. Use EXTREME caution when using a new seating position. The addition of anti-tippers may be required.

Removing Foldover Back Upholstery

Back Upholstery

1.Unfasten the two fastening flaps that secure the bottom of the existing back upholstery to the back canes.

2.Unfold the top of the back upholstery.

3.Lift up on the existing back upholstery and remove from the wheelchair.

Installing Foldover Back Upholstery

1.	Install the new back upholstery onto the back canes.
2.	Wrap the end of a fastening flap around the back cane.
3.	Insert the end of the fastening flap through the loop.
4.	Wrap the fastening flap around the back cane again and press firmly
	to secure.
5.	Fold the top of the back upholstery down over the back canes
	towards the front of the wheelchair.

Fastening Strips

Fastening Flap

Front of

Wheelchair

Fold

Fastening Flap

Loops

Back Canes

6. Press firmly to secure the fastening strips.

FIGURE 9 Removing/Installing Foldover Back Upholstery

Invacare®Top End Reveal™Wheelchair 56 Part No 1171880