Leica Connecting to the Windows PC, DVD provided with the IC80 HD, Installation and connection

Page 14

Connecting to the Windows PC

For instructions on installing and using the software for PC mode, refer to the

DVD provided with the IC80 HD.

Eyepieces have a fixed, circular field of view. However, the image sensor of the Leica IC80 HD is rectangular. Therefore, the

image field of the camera shows less informa- tion than you see when looking through the eyepieces (see page 10).

Installation and connection

1.Place the DVD provided into the computer's disk drive and follow the instructions for installing the software.

2.Connect the Leica IC80 HD and the compu- ter using the USB cable provided.

The Leica IC80 HD is powered by the computer via the USB cable. This chan- ges the color of the LED on the Leica IC80 HD.

As soon as the LED is green, you can open the software and view, acquire or manage images.

3.Follow the instructions in the software for adjusting and acquiring an image.

Leica IC80 HD

Manual

14

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Leica IC80 HD Manual Table of Contents General Instructions Safety Concept Important information Symbols UsedThis symbol indicates especially impor Description Safety InstructionsInstallation location Intended useTransport Repairs, service workInstallation in third-party products DisposalLeica IC80 HD Leica Application Suite IntroductionReal Full HD display Looking through the eyepieces Live image 1920×1080 Using the optional graticuleEffective Displayed Section Optional accessory handswitch/footswitch Standard Delivery and Optional AccessoriesϘϘ Power pack Standard equipmentInstallation Manual provided with the microscope AssemblyAssembling the Camera DVD provided with the IC80 HD Connecting to the Windows PCInstallation and connection Aspect ratio Limitations in PC ModeRemote control Leica Application SuiteHdmi interface Using an Additional Hdmi Monitor in PC ModeConnecting the Hdmi monitor Stand-alone Kit Requirements Application, Standard Delivery, RequirementsStandard delivery Stand-alone kit is designed for Power socket using the power packCables and Terminals CablesCapacity Information about SD Memory CardsFile system and formatting Write protectionCapturing images Capturing Images without a ComputerSave any images to the SD card Automatic White Balance Adjusting the White BalanceManual white balance Remote control Remote controlChanging the Battery Remote Control Changing the BatteryChecking the battery Changing the video standard Analog Video Display without a ComputerConnection Camera Menu Opening and closing the camera menu Point the remote control towards the cameraCalling up the Camera Menu Color Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureLive RES resolution of the live image IMG RES resolution of the captured imageMovie RES resolution of videos Quality of the image captureCAM Logo camera information Setup CAM Camera SettingsUpdate Eprom firmware update Defines how long the menu is displayed on the screen Setup User User-defined SettingsSET Illum Mode -1 to 3 save illumination modes Spectrum of possible situations Changing the illumination modePredefined Illumination Scenarios AppearsCare and Maintenance Leica Microsystems authorized dealer Care and MaintenanceGeneral Specifications Leica IC80 HD Standards Power supply voltage and frequency ϘϘ Input 5 V DC/500mAOther Dimensional Drawings Dimensional Drawings
Top Page Image Contents