Leica Complete Guide to Camera Settings and Setup for IC80 HD Models

SETUP CAM (Camera Settings)

Color	SET DATE TIME	PRESS OK
exposure	RESET CAMERA	PRESS OK
Resolution	UPDATE eprom	PRESS OK
setup cam	CAM LOGO	PRESS OK
Setup User	CAM MODE	PC-MODE
Main menu	Submenu

The camera settings enable you to control internal parameters such as the date or time, update the firmware or reset the camera. You can

also switch the camera from stand-alone to PC mode (or vice versa).

SET DATE TIME

This command sets the date and time as well as the format for display- ing them. The following formats are available for selection: YYMMDD –

DDMMYY – MMDDYY

RESET CAMERA

This command resets the camera to the factory settings. All user informa- tion (such as white balance, resolution etc.) is reset.

UPDATE EPROM (firmware update)

Allows you to update the firmware via the SD card. Refer to the manual you received along with the firmware file.

CAM LOGO (camera information)

Shows the following on the monitor: Leica logo, histogram, date/time and image counter.

CAMERA MODE

Toggles between the PC and stand-alone modes. You can also toggle between PC and stand-alone mode by pressing the black button for more than 5 sec until a message appears on the screen.

Leica IC80 HD Manual 32