Leica IC80 HD manual Using an Additional Hdmi Monitor in PC Mode, Hdmi interface

Page 16

Using an Additional HDMI Monitor in PC Mode

In PC mode, the camera image is always shown in the preview window of Leica Application Suite. In addition, another compu- ter monitor or television can be connected via

the HDMI interface.

The image cannot be output via both the HDMI and analog ports simultaneously.

The HDMI port always has priority. To output the image via the analog port, you have to remove the HDMI cable from the camera.

The image resolution on the attached HDMI or television screen is limited to the live image resolution inside the LAS EZ soft-

ware. Due to technical limitations it is not possi- ble to provide a HD-ready or Full-HD live image stream to the attached screen. In order to see the higher resolution on the attached screen, please use the camera in standalone mode (see page 17)

Connecting the HDMI monitor

1.Connect the HDMI cable provided to the Leica IC80 HD.

2.Connect the HDMI cable to the HDMI tele vision or monitor.

Leica IC80 HD	Manual	16

Image 16

Contents Leica IC80 HD Manual Table of Contents General Instructions Safety Concept This symbol indicates especially impor Symbols UsedImportant information Safety Instructions Installation locationDescription Intended useRepairs, service work Installation in third-party productsTransport DisposalLeica IC80 HD Real Full HD display IntroductionLeica Application Suite Effective Displayed Section Using the optional graticuleLooking through the eyepieces Live image 1920×1080 Standard Delivery and Optional Accessories ϘϘ Power packOptional accessory handswitch/footswitch Standard equipmentInstallation Assembling the Camera AssemblyManual provided with the microscope Installation and connection Connecting to the Windows PCDVD provided with the IC80 HD Limitations in PC Mode Remote controlAspect ratio Leica Application SuiteConnecting the Hdmi monitor Using an Additional Hdmi Monitor in PC ModeHdmi interface Stand-alone Kit Standard delivery Application, Standard Delivery, RequirementsRequirements Power socket using the power pack Cables and TerminalsStand-alone kit is designed for CablesInformation about SD Memory Cards File system and formattingCapacity Write protectionSave any images to the SD card Capturing Images without a ComputerCapturing images Manual white balance Adjusting the White BalanceAutomatic White Balance Remote control Remote controlChecking the battery Remote Control Changing the BatteryChanging the Battery Connection Analog Video Display without a ComputerChanging the video standard Camera Menu Calling up the Camera Menu Point the remote control towards the cameraOpening and closing the camera menu Color Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureIMG RES resolution of the captured image Movie RES resolution of videosLive RES resolution of the live image Quality of the image captureUpdate Eprom firmware update Setup CAM Camera SettingsCAM Logo camera information SET Illum Mode -1 to 3 save illumination modes Setup User User-defined SettingsDefines how long the menu is displayed on the screen Changing the illumination mode Predefined Illumination ScenariosSpectrum of possible situations AppearsCare and Maintenance General Care and MaintenanceLeica Microsystems authorized dealer Specifications Leica IC80 HD Other Power supply voltage and frequency ϘϘ Input 5 V DC/500mAStandards Dimensional Drawings Dimensional Drawings