Leica IC80 HD manual Safety Instructions, Description, Intended use, Non-intended use

Page 6

Safety Instructions

Description

The individual modules fulfill the highest requi- rements in terms of observation and documen- tation with the Leica IC80 HD.

Intended use

ϘϘ Refer to the "Safety Concept" brochure.

Non-intended use

ϘϘ Refer to the "Safety Concept" brochure.

The instruments and accessories described in this manual have been safety-tested and checked for possible hazards. The responsible Leica affiliate must be consulted whenever the instrument is altered, modified or used in conjunction with non-Leica components that are outside of the scope of this manual.

Unauthorized alterations to the instrument or noncompliant use shall void all rights to any warranty claims!

Installation location

ϘϘ Refer to the "Safety Concept" brochure.

ϘϘ Electrical components must be placed at least 10 cm away from the wall and from flammable substances.

ϘϘ Avoid large temperature fluctuations, direct sunlight and vibrations. These conditions can distort measurements and microgra- phic images.

ϘϘ In warm and warm-damp climatic zones, the individual components require special care in order to prevent the build-up of fungus.

Requirements to be met by the operator: ϘϘ Refer to the "Safety Concept" brochure.

Ensure that:

ϘϘ The Leica IC80 HD is operated, maintained and repaired only by authorized and trai- ned personnel.

ϘϘ All operators have read, understood and observe this User Manual, and particularly the safety regulations.

Leica IC80 HD	Manual	6

Image 6

Contents Leica IC80 HD Manual Table of Contents General Instructions Safety Concept Symbols Used This symbol indicates especially imporImportant information Description Safety InstructionsInstallation location Intended useTransport Repairs, service workInstallation in third-party products DisposalLeica IC80 HD Introduction Real Full HD displayLeica Application Suite Using the optional graticule Effective Displayed SectionLooking through the eyepieces Live image 1920×1080 Optional accessory handswitch/footswitch Standard Delivery and Optional AccessoriesϘϘ Power pack Standard equipmentInstallation Assembly Assembling the CameraManual provided with the microscope Connecting to the Windows PC Installation and connectionDVD provided with the IC80 HD Aspect ratio Limitations in PC ModeRemote control Leica Application SuiteUsing an Additional Hdmi Monitor in PC Mode Connecting the Hdmi monitorHdmi interface Stand-alone Kit Application, Standard Delivery, Requirements Standard deliveryRequirements Stand-alone kit is designed for Power socket using the power packCables and Terminals CablesCapacity Information about SD Memory CardsFile system and formatting Write protectionCapturing Images without a Computer Save any images to the SD cardCapturing images Adjusting the White Balance Manual white balanceAutomatic White Balance Remote control Remote controlRemote Control Changing the Battery Checking the batteryChanging the Battery Analog Video Display without a Computer ConnectionChanging the video standard Camera Menu Point the remote control towards the camera Calling up the Camera MenuOpening and closing the camera menu Color Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureLive RES resolution of the live image IMG RES resolution of the captured imageMovie RES resolution of videos Quality of the image captureSetup CAM Camera Settings Update Eprom firmware updateCAM Logo camera information Setup User User-defined Settings SET Illum Mode -1 to 3 save illumination modesDefines how long the menu is displayed on the screen Spectrum of possible situations Changing the illumination modePredefined Illumination Scenarios AppearsCare and Maintenance Care and Maintenance GeneralLeica Microsystems authorized dealer Specifications Leica IC80 HD Power supply voltage and frequency ϘϘ Input 5 V DC/500mA OtherStandards Dimensional Drawings Dimensional Drawings