Remote Control: Changing the Battery
Checking the battery
If you are not sure whether the remote control is working correctly, test the function as follows:
1.Switch on the microscope and monitor so that you see the live image on the monitor.
2.Hold the remote control in the beam path so that it faces upwards and press any key.
Because the chip of the camera also responds to the infrared range, you can see the LED at the top of the remote control light up. If this is not the case, the battery probably needs to be changed.
Changing the Battery
1.Remove the battery insert on the rear of the remote control.
2.Replace the battery.
For the replacement, you need a button battery of type CR2025.
Leica IC80 HD | Manual | 24 |
|
|
|