Leica manual Leica IC80 HD

Page 38
ϘϘ
ϘϘ
ϘϘ
ϘϘ
ϘϘ
ϘϘ
ϘϘ

Leica IC80 HD

IC80 HD Digital Camera

ϘϘ Weight 700 g (camera only) ϘϘ Exposure time 2 msec. – 2 sec.

ϘϘ Live image on computer screen up to 25 fps (1024×768 pixels) Full-screen image capture 2048 × 1536 pixels, 3.1 megapixels ϘϘ Sensor size: 6.55 mm × 4.92 mm

ϘϘ Pixel size: 3.2μm × 3.2μm

Sensor

ϘϘ Sensor type: Micron 1/2" CMOS ϘϘ Gain 1× – 20×

ϘϘ Color depth 24-bit

ϘϘ File formats JPEG / TIFF/ BMP

Software

Operating systems: Windows XP, Windows Vista

Leica software: LAS EZ Software (PC)

Mechanical and optical interfaces

Fits between tube and stand via standard Leica dovetail Midpoint offset between top and bottom of  dovetail < 0.4 mm

Light distribution optical 50% / camera 50% No visible reflections, dust or dirt on the prism Internal video magnification 0.5×

Sensor centered on optical axis ± 0.1 mm

Sensor aligned horizontally / vertically ±1 degree

Electronic interfaces

ϘϘ Compatibility: USB 2.0 mini socket

ϘϘ Analog video port (RCA plug) PAL or NTSC composite video signal ϘϘ Pinhole switch for toggling between PAL and NTSC video mode ϘϘ 2-color LED for power on (green) / image capture (red)

ϘϘ Integrated SD slot (Secure Digital)

ϘϘ Capture switch for image acquisition

ϘϘ Reset function when capture switch is pressed longer than  10 seconds

Leica IC80 HD

Manual

38

 

 

 

Image 38
Contents Leica IC80 HD Manual Table of Contents General Instructions Safety Concept Important information Symbols UsedThis symbol indicates especially impor Description Safety InstructionsInstallation location Intended useTransport Repairs, service workInstallation in third-party products DisposalLeica IC80 HD Leica Application Suite IntroductionReal Full HD display Looking through the eyepieces Live image 1920×1080 Using the optional graticuleEffective Displayed Section Optional accessory handswitch/footswitch Standard Delivery and Optional AccessoriesϘϘ Power pack Standard equipmentInstallation Manual provided with the microscope AssemblyAssembling the Camera DVD provided with the IC80 HD Connecting to the Windows PCInstallation and connection Aspect ratio Limitations in PC ModeRemote control Leica Application SuiteHdmi interface Using an Additional Hdmi Monitor in PC ModeConnecting the Hdmi monitor Stand-alone Kit Requirements Application, Standard Delivery, RequirementsStandard delivery Stand-alone kit is designed for Power socket using the power packCables and Terminals CablesCapacity Information about SD Memory CardsFile system and formatting Write protectionCapturing images Capturing Images without a ComputerSave any images to the SD card Automatic White Balance Adjusting the White BalanceManual white balance Remote control Remote controlChanging the Battery Remote Control Changing the BatteryChecking the battery Changing the video standard Analog Video Display without a ComputerConnection Camera Menu Opening and closing the camera menu Point the remote control towards the cameraCalling up the Camera Menu Color Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureLive RES resolution of the live image IMG RES resolution of the captured imageMovie RES resolution of videos Quality of the image captureCAM Logo camera information Setup CAM Camera SettingsUpdate Eprom firmware update Defines how long the menu is displayed on the screen Setup User User-defined SettingsSET Illum Mode -1 to 3 save illumination modes Spectrum of possible situations Changing the illumination modePredefined Illumination Scenarios AppearsCare and Maintenance Leica Microsystems authorized dealer Care and MaintenanceGeneral Specifications Leica IC80 HD Standards Power supply voltage and frequency ϘϘ Input 5 V DC/500mAOther Dimensional Drawings Dimensional Drawings