Leica IC80 HD manual Information about SD Memory Cards, File system and formatting, Capacity

Page 20

Information about SD Memory Cards

Be absolutely certain to read the following instructions about format- ting and handling the memory card provided

in order to prevent malfunctions during image acquisition.

File system and formatting

So that the SD card works correctly and is detec- ted by the Leica IC80 HD, it has to use the "FAT" file system. Most memory cards are factory- formatted with FAT so that they can be used immediately.

An SD card cannot be formatted in the Leica IC80 HD. If it is necessary to format the card, use a computer to do so. You can also delete the files on the card in any digital camera that works with SD cards. During the deletion, the FAT file system is installed automatically.

Capacity

SD cards of class 4 and 6 can be used with the camera. Also so called SDHC (high capacity) cards with up to 32 GB memory are supported.

Write protection

Some SD memory cards are equipped with a slide for write protection. If the slide is pressed down, no new images can be

saved. In addition, existing images are protec- ted from being deleted.

If you cannot save any more images to the SD card, check to make certain that the write protection is disabled.

Orientation

Make sure that the memory card is oriented correctly before inserting it into the camera. If you accidentally insert the

card the wrong way around, this could damage the camera.

Leica IC80 HD

Manual

20

 

 

 

Image 20
Contents Leica IC80 HD Manual Table of Contents General Instructions Safety Concept Important information Symbols UsedThis symbol indicates especially impor Safety Instructions Installation locationDescription Intended useRepairs, service work Installation in third-party productsTransport DisposalLeica IC80 HD Leica Application Suite IntroductionReal Full HD display Looking through the eyepieces Live image 1920×1080 Using the optional graticuleEffective Displayed Section Standard Delivery and Optional Accessories ϘϘ Power packOptional accessory handswitch/footswitch Standard equipmentInstallation Manual provided with the microscope AssemblyAssembling the Camera DVD provided with the IC80 HD Connecting to the Windows PCInstallation and connection Limitations in PC Mode Remote controlAspect ratio Leica Application SuiteHdmi interface Using an Additional Hdmi Monitor in PC ModeConnecting the Hdmi monitor Stand-alone Kit Requirements Application, Standard Delivery, RequirementsStandard delivery Power socket using the power pack Cables and TerminalsStand-alone kit is designed for CablesInformation about SD Memory Cards File system and formattingCapacity Write protectionCapturing images Capturing Images without a ComputerSave any images to the SD card Automatic White Balance Adjusting the White BalanceManual white balance Remote control Remote controlChanging the Battery Remote Control Changing the BatteryChecking the battery Changing the video standard Analog Video Display without a ComputerConnection Camera Menu Opening and closing the camera menu Point the remote control towards the cameraCalling up the Camera Menu Color Automatic White Balance Enabling automatic white balanceAdjusting the white balance manually recommended Color Manual White BalanceManual exposure Automatic exposureIMG RES resolution of the captured image Movie RES resolution of videosLive RES resolution of the live image Quality of the image captureCAM Logo camera information Setup CAM Camera SettingsUpdate Eprom firmware update Defines how long the menu is displayed on the screen Setup User User-defined SettingsSET Illum Mode -1 to 3 save illumination modes Changing the illumination mode Predefined Illumination ScenariosSpectrum of possible situations AppearsCare and Maintenance Leica Microsystems authorized dealer Care and MaintenanceGeneral Specifications Leica IC80 HD Standards Power supply voltage and frequency ϘϘ Input 5 V DC/500mAOther Dimensional Drawings Dimensional Drawings