Capturing Images without a Computer
Before capturing the image, ensure that enough memory is available on the SD card and that write protection has not
been activated. If the SD memory card is full or protected, the LED of the Leica IC80 HD remains red, and you cannot acquire any more images.
If you want to use the 
the camera must not simultaneously be connected to a computer. If it is, you cannot
save any images to the SD card.
In the highest resolution, a single image 
takes up approx. 1.3 megabytes of storage space on the SD card. This means that per giga- byte of capacity, you can save over 700 images.
Capturing images
1.Focus on the specimen.
2.Insert the SD memory card into the slot on the side of the camera until you hear it click into position.
The LED of the camera is illuminated in green. The camera is now ready to save images to the SD memory card.
3.Briefly press the red image capture button on the side of the camera to acquire an image.
You hear a signal tone as confirmation. While the image is acquired, the camera LED flashes green and the word "Capturing" flashes on the monitor.
4.After the image acquisition is complete, press the SD memory card into the storage space so that it pops out.
You can now transfer the images to your computer using a corresponding SD memory card reader.
Leica IC80 HD | Manual | 21 |
|
|
|