Motorola XTNID manual Side Buttons, Lithium-Ion Li-Ion Battery

RADIO OVERVIEW

• A Programmable Button

Default set to generate the current programmed call tone.

•B Programmable Button Default set to preset channel 1

•C Programmable Button Default set to preset channel 2

Note: A short press of either preset button (B or C) tunes the radio to the preset channel and the radio will play a good chirp. You can assign different functions to these buttons via the CPS. For example: Backlight Time Out, Reverse Burst, Power Select, Scan/ Nuisance Channel Delete, Monitor and Call Tones. To learn more about how to program these buttons refer to “Entering Programming Mode” on page 38 and “CPS

English 10

(Computer Programming Software)” on page 48.

Side Buttons

•Push-to-Talk (PTT) Button

Press and hold down this button to talk, release it to listen.

•Side Button 1 (SB1)

The Side Button 1 is a general button that can be configured by the CPS. The default setting of the SB1 button is "Monitor".

•Side Button 2 (SB2)

The Side Button 2 is a general button that can be configured by the CPS. The SB2 button default setting is ‘Scan/Nuisance Channel Delete’.

The Lithium-Ion (Li-Ion) Battery

XTNi™ Series provides different types of batteries. For more information, see “Battery Features and Charging Options” on page 12.