button until you reach the ‘Max Channel Programming Mode’:.
MAX CH |
| The radio display will blink the current | ||||||||
| maximum number of channels programmed. | ||||||||
| To program the maximum number of channels | ||||||||
| use the |
|
| / |
|
| buttons until you locate | ||
| the desired setting. Long press the PTT button | ||||||||
| |||||||||
PROGRAMMING FEATURES | to save and exit. |
| |||||||
Note: The value settings available are dependent | |||||||||
| |||||||||
|
| upon the maximum number of channels the | |||||||
|
| radio supports. |
| ||||||
|
|
| 42 |
|
|
|
| ||
|
|
|
|
|
|
| |||
English |
| ||||||||
|
|
|
|
|
|
|
|
| |
PROGRAMMING CALL TONES
Call Tones will enable you to transmit to other radios in your group in such way that you can alert them that you are about to talk or alert them without speaking.
In ‘Call Tone Selection Mode’, you can configure the call tone type for the radio. The settings available will depend on the maximum number of call tones your radio supports.
To program call tones, enter ’Programming Mode’ and scroll through the programming options until your display radio shows the Programming Call Tones selection:
TONE |
The current call tone setting will be blinking. You can select the desired call tone value
(0,1,2 or 3) by pressing the |
| / |