PROGRAMMING SCRAMBLE L
The scramble feature makes your transmissions sound garbled to anyone listening without the same scramble code. It doesn't guarantee confidentiality, but it adds an extra layer of privacy. Scramble default value is OFF.
Once you have entered ’Programming Mode’ and selected the channel in which you want to enable scramble (L), scroll up/down through the programming options by short pressing the PTT button, until your radio reaches the ‘Scramble Programming Mode’:
The current scramble setting will blink. You can select the desired scramble value (0,1,2 or 3)
by pressing the 
/ 
buttons. Long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.
Note: The values available for scrambling are dependent upon the values programmed via the CPS. When the scramble setting is "0" it means it is disabled.
PROGRAMMING MAXIMUM NUMBER OF CHANNELS
You can configure the maximum number of channels for the radio.
Once you have entered ’Programming Mode’ scroll up/down by short pressing the PTT
PROGRAMMING FEATURES
41English