GE 27957 Switching Between Speakerphone and Handset, Intercom Operation, Making an Intercom Call

Switching Between Speakerphone and Handset

You can switch between speakerphone and handset after dialing a number, or any time during a conversation.

Speaker to Handset — PressTALK/call back on handset, and then press SPEAKER/CALL BACK on the base or lift the corded handset. Speak into the handset.

- OR -

In Speakerphone mode, press the HOLD button on the base unit to place the call on hold.Then pressTALK/call back button on cordless handset or lift the corded handset. Speak into the handset.

Corded/Cordless Handset to Speaker — Press SPEAKER/CALL BACK, then hang up the handset. Speak into the Speakerphone.

Intercom Operation

A two-way intercom is possible between the base and cordless handset without tying up the telephone line and since the telephone line is not used, you can still receive incoming calls.

Making an Intercom Call

1.Make sure the phone is OFF (not inTALK mode).

2.Press the PAGE/INTERCOM button (base) or the intercom button (cordless handset). A paging tone sounds at the base and cordless handset.

3.When finished, press the PAGE/INTERCOM button or the intercom button.

NOTE: To cancel the intercom call, press PAGE INTERCOM (base) or intercom (cordless handset).

Answering an Intercom Call

1.Press the PAGE/INTERCOM button (base) or the intercom button (handset).

2.When finished, press the PAGE/INTERCOM or the intercom button again.

23