GE 27957 manual Remote Access, Using the Handset

2.Begin speaking after you hear the beep.

3.Release the MEMO button after you are finished.

Remote Access

This section explains two types of remote access: using the cordless handset to access the answering system and accessing the answering system from another phone.

You may access the answering system on the base with the handset buttons.

You may also access your answering system from any touch-tone phone by entering a 3-digit security code after you hear the outgoing announcement. A voice menu system guides you through the steps.

Using the Handset

Press the FORMAT/answerer button to access the answering system.

IF system announces there are new messages;

Press the PLAY/STOP button (2 key) on the handset to listen to new messages. While a new message is playing, you can do the following:

•Press the PLAY/STOP button (2 key) to stop the message playback.

•Press and release the  button (1 key) to restart the current message.

•Press and release the  button (3 key) to go to the next message.

IF there have not been any new messages received since last review OR after system plays all new messages;

Press the PLAY/STOP button (2 key) on the handset to listen to messages. While a message is playing, you can do the following:

•Press the PLAY/STOP button (2 key) to stop the message playback (press PLAY/STOP again to start over at the voice menu.)

•Press and release the  button (1 key) to restart the current message.

•Press and release the  button (3 key) to go to the next message.

•Quickly press and release the  button (1 key) repeatedly to scroll through previous messages.

When you are finished listening to your messages, press the FORMAT/ answerer button again to quit.

NOTE: You may listen to the voice menu at any time by pressing 7.

37