GE 27957 manual Storing a Name and Number in Memory

2.If the originating unit is the handset, press the PAGE/INTERCOM button on the base to set up the intercom.Then press the MEMORY/conference button on the handset to retrieve the external caller.Three-way conversation begins, and CONFERENCE shows in the display.

3.If the originating unit is the base, press the intercom button to setup the intercom.Then press the base MEM/CONFERENCE button on the base to retrieve the external call.Three-way conversation begins, and CONFERENCE shows in the display.

NOTE: A handset or the base may enter a conversation directly by pressing the TALK/call back button on the handset or the SPEAKER/CALL BACK button on the base while the other handset or the base is engaged with an external call.

Memory

The cordless handset and base each have their own separate memory storage areas. Store ten 15-character names and 24-digit telephone numbers in the handset memory, ten 15-character names and 24-digit telephone numbers in the base memory.

NOTE: Press *TONE/EXIT (base) or TONE */exit (cordless handset) to exit memory.

Storing a Name and Number in Memory

1.Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless handset) button.

2.Press the desired memory location button (0 through 9 number keys) or use the REVIEW or NEXT button (base) or the CID/VOL (or) button (cordless handset) to scroll to the desired location. If the memory location is occupied, the stored name and number displays. If the memory location is unoccupied, EMPTY shows in the display.

3.Press the MEM/CONFERENCE (base) or MEMORY/conference (cordless handset) button again.The display shows ENTER NAME.

25