NOTES: If you find it necessary to dial all local calls with the area codes included press and release flash/program until “SET AREA CODE” appears, then enter “000.”
If the number is corrupted, such as a number in a name or an alphabetical character in a number, an error tone comes from the handset and the number won’t dial.
Deleting the Current Caller ID Record
To delete only the record in the display:
1.Use the REVIEW or NEXT button (base) or CID/VOL (or) button (cordless handset) to display the desired Caller ID record.
2.Press DELETE (base) or CHAN/delete (cordless handset) button.The display asks DELETE CALL ID? for several seconds.
3.Press DELETE (base) or CHAN/delete (cordless handset) again, within ten seconds, to erase the record.
The display shows **DELETED**, confirming the deletion.
Deleting All Caller ID Records
To delete all the Caller ID records in memory:
1.Use the REVIEW or NEXT button (base) or CID/VOL (or) button (cordless handset) to display any Caller ID record.
2.Press and hold DELETE (base) or CHAN/delete (cordless handset). The display asks DELETE ALL? for several seconds.
3.Press DELETE (base) or CHAN/delete (cordless handset) again, within ten seconds, to erase all records.The display shows NO CALLS.
Caller ID Errors
If there is an error in the transmission of information to your Caller ID phone, ERROR shows in the display.
If you have not subscribed to Caller ID service or it is not working, NO DATA shows in the display.
33