Recall | The Basics |
|
|
Recall
| The term “flash/recall” is used in a number of feature instructions. Since many standard telephones | |||
| have a | button, this guide assumes that you have one. If your standard telephone does not have | ||
| a |
| button, perform the following to “Flash the hookswitch.” | |
| Recall |
|
| |
| ➤ | To manually flash the hookswitch, while on a call, press the hookswitch down about 1/2 second, | ||
|
| then release it. |
| |
| You should hear dial tone after doing this. | |||
Recall on Outside Lines |
| |||
| Some outside line features, such as conferencing or behind PBX operation require “recall on the | |||
| outside line,” to dial the PBX feature access code or extension numbers. | |||
➤ To recall an outside line |
| |||
1. | Press | . After you press | , you hear dial tone. This recalls the Toshiba system only. | |
2. | Press | . You hear the PBX dial tone.You can now dial a PBX feature access code or extension | ||
|
| #45 |
| |
| number. |
|
| |
Making RecallCall |
| |||
| ➤ Lift the handset, then dial the number. | |||
| A line may be automatically selected or you can manually choose a line. Dial tone plays through the | |||
| handset. Call progress tones (Ringback Tone, Busy Tone, etc.) are heard through the handset. | |||
Answering a Call | Recall | |||
| ➤ | PickRecallup the handset. |
2 | Strata CTX Standard Telephone User Guide October 2002 |