Toshiba Standard Telephone manual Call Park Orbits, To park a call, To retrieve a parked call

Page 23

Call Park Orbits	Advanced Operation

Call Park Orbits

The Call Park feature enables you to hold a call temporarily in a location other than your telephone. These areas are called orbits. You or another telephone user can retrieve a parked call from its orbit by specifying the orbit number. You can specify one of 20 General Park Orbits (7000~7019) or a valid extension number within the system.

Once you have parked a call in an orbit, you can:

♦Hang up and retrieve the parked call at a later time

♦Originate another call

♦Access a voice paging device to announce the parked call for pickup from another station

If you park a call and it is not retrieved, it will recall to the parking station and one of the following occurs:

♦If your station is idle when the system Call Park recall timer expires, the parked call automatically recalls to your station.

♦If your station is busy, the parked call camps on.

➤To park a call

1.	While on a call, press				+	.
2.	Specify the Park Orbit by doing one of the following:
	♦ Enter a valid extension.
	♦	Press	and the system automatically selects your extension as the orbit.
	If the analog hold feature is set in programming, the line LED will flash on other telephones,
	which enables the				to be picked up from another telephone.
3.	Hang up. If the parked				is not retrieved within a specified time, the call rings back to your phone.
➤ To retrieve a parked call
1.	Lift the handset, press				.
2.	Enter the Orbit Number where the call is parked or						to enter the extension from which you are
14	calling.	#		Recall#32		#33	#Strata CTX Standard Telephone User Guide October 2002

Image 23

Contents Standardtelephone Toshib a Copyright Telecomns Division Publication InformationContents Contents Iii Contents Organisation IntroductionCalls attention to important instructions or information ConventionsRinging Patterns BasicsTo recall an outside line RecallAnswering a Call Recall on Outside LinesTurning On/Off Message Waiting LED on Another Extension Message WaitingResponding to a Message Waiting Indication To transfer a call directly to Voice Mail VM Call TransferTo transfer conference control Conference CallsTo conference calls Adding Voice Mail to a Conference Connecting Two Outside LinesVerified/Non-Verified Account Codes Account Code CallsTo enter a Voluntary Account Code To dial using Forced Account CodesForced Account Codes Voluntary Account Codes Verified/Non-VerifiedTo activate Automatic Busy Redial To cancel Automatic Busy RedialAutomatic Busy Redial Automatic CallbackStation To cancel ACBCall Forward Categories Call Forward SettingsTo use the Call Forward button sequence Call Forward ProceduresTo change your Pass Code Feature Button Sequence Call Forward Incoming Line Calls To retrieve a parked call Call Park OrbitsTo park a call To perform Call Pickup Call PickupGroup Pickup Page/Internal Call PickupCall Waiting To deactivate DND Direct Inward System AccessDo Not Disturb To activate DNDDoor Locks Setting DND for Another ExtensionTo call/monitor a door phone Door PhonesTo answer a door phone call To call from a door phone Emergency RingdownOverride Calls Busy OverrideTo perform Executive Override To perform Class of Service OverrideDo Not Disturb Override To use DND OverrideTo make a Group PagingPrivacy Override To make a Page Announcement to phones or external speakersTo answer an All Call All CallEmergency To make an All CallRedial Advanced Speed Dial Operation To store a Station Speed Dial Number using an Access CodeStore a Station Speed Dial Number Mail Direct Transfer #66#412 Feature Access Codes#33 85#392 450 Important Safety Notes Safety ApprovalSafety Approval Table A-1 EU Compliance Equipment details Strata CTX100 Table A-2 Type ApprovalTable A-3 Network Planning InformationTable A-3 Table A-4 Index IN-2