Toshiba Standard Telephone Conference Calls, To conference calls, To transfer conference control

Page 14

The Basics	Conference Calls

Conference Calls

You can conference together up to eight parties (including your own) - with up to six parties being external network lines. The actual number of conference parties with acceptable volume levels depends on the local and far end telephone line conditions.

The person who initiates the conference call is the Master. If, after the conference is established, the Master exits the conference, and the first station to have been added to the conference becomes the Master.

➤To conference calls

1.	While on a call, press		. You hear dial tone.			Recall
2.		Recall		Recall		Recall
2.	Call another station or outside line.
3.	When the called party answers, press				. If you receive a busy tone or no answer, press
	again to return to the original connection.
4.	All parties are conferenced.
5.	Repeat the above steps to add lines to the conference. Keep in mind the maximum number of allowed
	conference parties.
	Note When the “master” of the conference hangs up, control is automatically transferred to the first
	internal station added to the conference call. If no other internal stations are included in the
	conference call, the call will be disconnected.
➤ To transfer conference control
1.	Do Steps 1 and 2 above to add the line you wish to transfer conference control to. See previous Note.
2.	Announce the call and hang up to transfer the call. This station now becomes the conference “master”
	with the ability to add or delete parties.

Strata CTX Standard Telephone User Guide October 2002

5

Image 14

Contents Standardtelephone Toshib a Publication Information Copyright Telecomns DivisionContents Contents Iii Contents Introduction OrganisationConventions Calls attention to important instructions or informationBasics Ringing PatternsRecall on Outside Lines RecallAnswering a Call To recall an outside lineTurning On/Off Message Waiting LED on Another Extension Message WaitingResponding to a Message Waiting Indication Call Transfer To transfer a call directly to Voice Mail VMTo transfer conference control Conference CallsTo conference calls Connecting Two Outside Lines Adding Voice Mail to a ConferenceAccount Code Calls Verified/Non-Verified Account CodesVoluntary Account Codes Verified/Non-Verified To dial using Forced Account CodesForced Account Codes To enter a Voluntary Account CodeAutomatic Callback To cancel Automatic Busy RedialAutomatic Busy Redial To activate Automatic Busy RedialTo cancel ACB StationCall Forward Settings Call Forward CategoriesTo use the Call Forward button sequence Call Forward ProceduresTo change your Pass Code Feature Button Sequence Call Forward Incoming Line Calls To retrieve a parked call Call Park OrbitsTo park a call Page/Internal Call Pickup Call PickupGroup Pickup To perform Call PickupCall Waiting To activate DND Direct Inward System AccessDo Not Disturb To deactivate DNDSetting DND for Another Extension Door LocksTo call/monitor a door phone Door PhonesTo answer a door phone call Busy Override Emergency RingdownOverride Calls To call from a door phoneTo use DND Override To perform Class of Service OverrideDo Not Disturb Override To perform Executive OverrideTo make a Page Announcement to phones or external speakers PagingPrivacy Override To make a GroupTo make an All Call All CallEmergency To answer an All CallRedial Advanced Speed Dial Operation To store a Station Speed Dial Number using an Access CodeStore a Station Speed Dial Number #66 Mail Direct TransferFeature Access Codes #412#33 85#392 450 Safety Approval Important Safety NotesSafety Approval Table A-1 EU Compliance Equipment details Strata CTX100 Type Approval Table A-2Network Planning Information Table A-3Table A-3 Table A-4 Index IN-2