Call Transfer | The Basics |
|
|
Call Transfer
1. | While on a call, press | . You hear internal dial tone. | Recall |
2. | party. | Recall | |
Dial the extension where the call will be transferred. You can remain on the line and announce the call | |||
| or immediately “blind transfer” the call. |
| |
| During call transfer, you can connect all three parties by pressing | . |
| ♦ If you get voice mail, you can leave a message or hang up and let the transferred caller leave | |||
|
| a message. |
|
|
| ♦ If you hear a long single tone, then announce the call over the called phone’s speaker. | |||
3. | Transfer with Camp On: If the station to which you want to transfer the call is busy, you may hang | |||
| up and the transferred trunk or station will be camped on to the busy destination. | |||
➤ To transfer a call directly to Voice Mail (VM) |
| |||
1. | While on a call, press | . | Recall | |
2. | Enter | #407 | Recall | |
. |
|
| ||
3. | Enter the VM mailbox number (usually the same as the extension number). | |||
4. | Hang up (the caller is connected to the VM mailbox) or, you can press | to return to the calling | ||
|
|
|
| |
4 |
|
| Strata CTX Standard Telephone User Guide October 2002 |