Toshiba Standard Telephone manual Emergency Ringdown, Override Calls, Busy Override

Page 29

Emergency Ringdown	Advanced Operation

➤To call from a door phone

1.Press the door phone button and then release it. You hear a distinctive ringing tone–one or five times (set in system programming).

2.When answered, speak at a normal voice level in the direction of the door phone.

Emergency Ringdown

If a station remains off-hook for a programmable period, it can be automatically treated as an Emergency Call and directed to an emergency destination. The station may have partially dialled a number or have dialed no digits at all. Each station is programmed with its specific emergency ringdown destination.

A station number or a group pilot number can be specified as an emergency ringdown destination. In a private network, the station or pilot number must be in the same network node. Remote emergency destination and door phones are not permitted.

Override Calls

The available override features are:

Busy Override

Ring Over Busy Override enables you to send a muted ring tone to a busy station to indicate a call is waiting. The Busy Override (BOV) muted ring can be programmed for each station to be two muted rings only or continued muted rings until the call is answered. This option applies to the station receiving the muted ring. The muted ring can be sent to the telephone speaker or to the telephone handset/headset and speaker.

➤To use Busy Override

➤	After reaching a busy station, press . A muted tone is heard at the busy station, indicating that a
	call is waiting. The station number displays2	.
20	call is waiting. The station number displays2		Strata CTX Standard Telephone User Guide October 2002

Image 29

Contents Standardtelephone Toshib a Copyright Telecomns Division Publication InformationContents Contents Iii Contents Organisation IntroductionCalls attention to important instructions or information ConventionsRinging Patterns BasicsAnswering a Call RecallRecall on Outside Lines To recall an outside lineTurning On/Off Message Waiting LED on Another Extension Message WaitingResponding to a Message Waiting Indication To transfer a call directly to Voice Mail VM Call TransferTo transfer conference control Conference CallsTo conference calls Adding Voice Mail to a Conference Connecting Two Outside LinesVerified/Non-Verified Account Codes Account Code CallsForced Account Codes To dial using Forced Account CodesVoluntary Account Codes Verified/Non-Verified To enter a Voluntary Account CodeAutomatic Busy Redial To cancel Automatic Busy RedialAutomatic Callback To activate Automatic Busy RedialStation To cancel ACBCall Forward Categories Call Forward SettingsTo use the Call Forward button sequence Call Forward ProceduresTo change your Pass Code Feature Button Sequence Call Forward Incoming Line Calls To retrieve a parked call Call Park OrbitsTo park a call Group Pickup Call PickupPage/Internal Call Pickup To perform Call PickupCall Waiting Do Not Disturb Direct Inward System AccessTo activate DND To deactivate DNDDoor Locks Setting DND for Another ExtensionTo call/monitor a door phone Door PhonesTo answer a door phone call Override Calls Emergency RingdownBusy Override To call from a door phoneDo Not Disturb Override To perform Class of Service OverrideTo use DND Override To perform Executive OverridePrivacy Override PagingTo make a Page Announcement to phones or external speakers To make a GroupEmergency All CallTo make an All Call To answer an All CallRedial Advanced Speed Dial Operation To store a Station Speed Dial Number using an Access CodeStore a Station Speed Dial Number Mail Direct Transfer #66#412 Feature Access Codes#33 85#392 450 Important Safety Notes Safety ApprovalSafety Approval Table A-1 EU Compliance Equipment details Strata CTX100 Table A-2 Type ApprovalTable A-3 Network Planning InformationTable A-3 Table A-4 Index IN-2