Toshiba DKT2004-CT manual To park a call, To retrieve a parked call

Page 46

Features

Call Park Orbits

If you park a call and it is not retrieved, it will recall to the parking station and one of the following occurs:

If your station is idle when the system Call Park recall timer expires, the parked call automatically recalls to your station.

If your station is busy, the parked call camps on.

If you have an LCD telephone, you can let the system automatically select an available orbit number which displays on your LCD.

To park a call

1.While on a call, press 3DUN￿LQ￿2UELW

...or &1)￿751 + ￿￿￿. The LED flashes green (consultation-hold).

2.Specify the Park Orbit using one of the following:

Press ￿ and the system automatically selects a General Park Orbit between

￿￿￿￿~￿￿￿￿. The chosen orbit appears on the LCD.

Enter a valid extension.

Press ￿ and the system automatically selects your extension as the orbit.

3.Hang up. The caller’s extension or line number and the orbit number are shown. If the parked call is not retrieved within a specified time, the call rings back to your phone. When a parked call recalls your phone, the LCD shows the line or extension that is recalling and the orbit number.

To retrieve a parked call

1.Press 3DUN￿LQ￿2UELW...or your extension button +￿￿￿￿.

2.Enter the Orbit Number where the call is parked or ￿ for the extension from which

you are calling. You cannot use ￿ to retrieve a parked call. The extension LED flashes at the in-use rate when the call is retrieved.

34

Strata DKT2004-CT Cordless Digital Telephone 10/02

Image 46
Contents DKT2004-CT Cordless Digital Telephone User Guide Publication Information Toshiba America Information SYSTEMS, INC. Tais Toshiba America Information Systems, Inc Contents Features Iii Contents Introduction OrganizationConventions Calls attention to important instructions or informationRelated Documents/Media Viii Grand Tour Applications BenefitsBenefits Cordless Digital Telephone Standard Parts Charge LED Batt Charge LED Power on LED Base Unit Controls and FunctionsFeatures Installation Review Safety InstructionsRatings are Input 120VAC 14W Output 10VDC 500mA Installation Select Location To use as a stand-alone telephone Connect and Apply Power to Base UnitConnect Telephone Cords To use with a desk telephoneLine In to DKT Circuit To attach the belt clip to the handset Install Handset Battery PackAttach Belt Clip to Handset optional To remove the belt clipTo remove the handset’s battery pack Removing and Charging Your Battery PackCharging Extra Battery Packs To charge the handset’s battery packTips on Extending Battery Pack Life Installing Optional HeadsetOn a Call Standby Mode Installation Configuration3 Entering Program ModeConfiguration Handset Handset Volume LevelRinger Volume Level MuteUsing the Handset Charging the HandsetSwitching a Call to Your Cordless Digital Telephone To transfer an active callSwitching a Call to the Desk Telephone VolTo erase a stored number Using MemoryTo store a number To dial a stored numberChain Dialing Features Account Code CallsVerified/Non-Verified Account Codes To dial using Forced Account CodesForced Account Codes Automatic Busy Redial To dial using the Account Code buttonTo enter an Account Code using access codes Voluntary Account Codes Verified/Non-VerifiedAutomatic Callback To cancel ACBTo set Automatic Callback System Auto RedialCall Forward StationCall Forward Settings Call Forward CategoriesTo change your Pass Code To use the Call Forward button sequenceCall Forward Incoming Line Calls Call Forward Any Call Set for Another StationCall Park Orbits Call Forward SystemTo park a call To retrieve a parked callPage/Internal Call Pickup Call PickupGroup Pickup To perform Call PickupFor Calls On Hold Dialing Description Direct Station Selection Buttons Hotline Call WaitingTo connect directly to another station’s extension Setting DND for Another Extension Do Not DisturbTo change your DND Pass Code Door LocksTo deactivate DND for another extension To unlock a doorTo answer a door phone call Door PhonesDoor Phone Name/Location Placing Line Appearances or DN Calls on Hold Emergency RingdownHeld Calls To call/monitor a door phoneRetrieving Held Calls Using Automatic HoldSwitching Between Calls 7 5Isdn Outgoing Calling SubaddressMessage Waiting Responding to a Lit Msg LEDBusy Override Off-hook Call AnnounceOverride Calls To make an OCA callTo use DND Override Do Not Disturb OverrideExecutive Override To perform Executive OverridePaging Class of Service OverrideTo perform Class of Service Override Privacy OverrideAll Call Answering aEmergency Redial To set/cancel PrivacyPrivacy To use Privacy ReleaseRelease and Answer Speed DialVoice Mail Direct Transfer Making a Call Using Speed DialTone/Pulse Dialing To change Tone DialingVoice Mail Direct Transfer Feature Feature Access Code Sequences Account Code Feature Access CodesCall Forward Any Calls Internal and External Call Forward External Calls Remote Activation Call Forward Remote ActivationCall Park Feature Access Codes LCR Outgoing Call Message Waiting MW Feature Feature Access Code Sequences LCD Language ChangePrivate Network Access Code Night Ring AnswerStart Application Feature Feature Access Code Sequences Speed Dial RegisterVolume Control Beep Volume Control Ringing Substitution of Dial Travelling Class OverrideFeature Access Codes Troubleshooting and Specifications Troubleshooting Problem SuggestionRange and Performance Nine Simultaneous Conversation ChannelsGeneral SpecificationsRadio Interference Base UnitIndex LCD Index
Related manuals
Manual 111 pages 11.87 Kb