Toshiba DKT2004-CT Emergency Ringdown, Held Calls, Placing Line Appearances or DN Calls on Hold

Features

Emergency Ringdown

➤To call/monitor a door phone

1.With the handset off-hook, press a extension. You hear dial tone and the LED flashes green (in-use).

2.Press ￿￿￿ + extension for the door location. A two-way talk-path exists between your telephone and the called door phone. You can audibly monitor the area around the door phone.

➤To call from a door phone

1.Press the door phone button and then release it. You hear a distinctive ringing tone–one or five times (set in system programming).

2.When answered, speak at a normal voice level in the direction of the door phone.

Emergency Ringdown

If a station remains off-hook for a programmable period, it can be automatically treated as an Emergency Call and directed to an emergency destination. The station may have partially dialed a number or have dialed no digits at all. Each station is programmed with its specific emergency ringdown destination.

A station number or a group pilot number can be specified as an emergency ringdown destination. In a private network, the station or pilot number must be in the same network node. Remote emergency destination and door phones are not permitted.

Held Calls

Calls on hold can be released automatically if the held party hangs up and the network provides a hold-release signal.

Important! The DKT2004-CT does not support Exclusive Hold.

Placing Line Appearances or [DN] Calls on Hold

➤Press +2/'. The Line or [DN] LED flashes green at the on-hold rate.

You hear recall tone when your station is idle (or two times only when busy) if you do not retrieve the held call before “Hold the recall” time set in system programming expires.

Strata DKT2004-CT Cordless Digital Telephone 10/02 41