NetComm V24W 25 , 26 , 27 , 28

Page 15

 

NetComm VoIP WiFi Phone V24W User Guide

25

Move down to Password and press Edit soft key. Enter the

Password in the prompt window and press the Center

Selection Key.

Note: Press the * (star) key to switch between the different modes (Capital letters, small letters and numbers).

26 On the SIP Settings screen, select “Return”.

27 On the main menu, select Return.

28

The standby screen will indicate that the IP Phone is ready

 

for phone calls (Ready message at the top of the screen).

Note: You can disable the phone password settings if you do not want to enter the password every time you turn on the device. Change the Enable setting in Phone Settings > Password Setting; change it from “Yes” to “No”. Please be aware that you can not access the SIP settings page when Password setting is disabled.

YML873 V24W User Guide - 14

Image 15