NetComm V24W manual Profiles

Page 24

NetComm VoIP WiFi Phone V24W User Guide

Connection to a Default Hotspot

Before you begin, please make sure that you have saved your User Name and Password for the default hotspot you want to use. These login settings can be configured through the Hotspot screen.

1.Select Set Wi-Fiin Wireless menu. Highlight the wireless hotspot that you want to use and press the center selection key to select it. If the hotspot that you want is not shown, select Rescan soft key to scan again.

2.You will be notified when the V24W Phone has connected to the hotspot, and a checkmark will appear next to the name of the hotspot.

3.A new window will appear. On the Select Hotspot screen, scroll through the choices, and press the center selection key to select the appropriate hotspot.

(If the hotspot you want is not listed on the Select Hotspot screen, proceed to step 3 of the following section, Connection to a New Hotspot)

4.The IP Phone will automatically use your User Name and Password to log in.

5.After you have logged in, select Exit to return to the Wireless screen.

Connection to a New Hotspot

1.Select Set Wi-Fiin Wireless menu. Highlight the wireless hotspot that you want to use and press the center selection key to select it. If the hotspot that you want is not shown, select Rescan soft key to scan again.

2.You will be notified when the V24W Phone has connected to the hotspot, and a checkmark will appear next to the name of the hotspot.

3.A new window will appear. On the Select Hotspot screen, select IE Browser.

4.The web browser will automatically open. Follow the on-screen instructions to access the hotspot.

5.After you have gained access, you can browse the Internet and do VoIP call.

To save the new hotspot settings, please follow the steps below:

1.When you are connected to the new hotspot, view the main menu.

2.Select Wireless.

3.Select Profiles.

4.Select Option.

5.Select Save <network name>.

Then you will be automatically returned to the Wi-Fi Profiles screen.

Profiles

The profile menu allows you to configure and save different profile for different wireless access point. When accessing this menu, you will see a list of profiles (when you have profiles already configured). Press the Option soft key to see the option or the Exit soft key to return to the previous menu.

You can also designate the order of the profiles saved by the V24W Phone. The next time it is powered on, the phone will try to use the first profile automatically. If that network is not available, the phone will try the next profile. This will continue until it has connected to a wireless network.

YML873 V24W User Guide - 23

Image 24