NetComm V24W Chapter 3: Installing and Using the NetComm V24W WiFi VoIP Phone

Page 8

NetComm VoIP WiFi Phone V24W User Guide 

 

 

 

Chapter 3: Installing and Using the NetComm 

V24W WiFi VoIP Phone 

 

  

 

This chapter provides instructions for first-time installation and use of the NetComm V24W 

Phone. Firstly, you need to insert the battery into the V24W Phone and then configure it for your 

wireless network and VoIP service. After that, you will be able to make and receive Internet 

phone calls. 

 

Inserting the Battery into the V24W Phone 

 

To insert the battery, follow these instructions: 

 

1.   Remove the battery compartment cover by pressing the silver button and sliding the 

battery cover downward. 

 

2.   Insert the battery and ensure that the metal contact at the bottom of the battery align 

with the metal contact the top of the battery compartment. 

 

3.  Replace the battery cover by sliding it upward until it snaps into place. 

 

 

Charging and Powering the V24W Phone 

 

1. 

Plug the USB mini-B connector of the included power adapter into the 

USB mini-B port of the IP Phone. Then connect the power adapter to a standard 

electrical outlet. 

 

2.  The Power LED will flash, alternating between blue and purple. For the initial 

charge, allow the battery to charge for at least 10 hours, so the battery will have 

a full charge, which is indicated by a solidly lit Power LED. This will maximizes 

battery performance and life. 

 

NOTE:   When the battery is low on power, it will emit one warning sound or vibration, 

unless the Ring Type is set to Silent. (For more information about Ring Types, refer to 

Chapter 4: Configuring the V24W WiFi VoIP Phone.”) 

 

Setting up the V24W Phone 

 

1 

Press the 

Power

 button to turn on the V24W phone 

 

 

 

YML873 V24W User Guide - 7 

Image 8