NetComm V24W 2 , 3 , 4 , 5 ,

Page 9

NetComm VoIP WiFi Phone V24W User Guide

2

The phone will boot up and automatically scan the wireless

network.

Notes: This might take a few minutes to complete.

3

A list of wireless network will be displayed. You can see the

wireless name (SSID), security status (a lock means wireless

 

security is enable) and the signal strength for each wireless

 

network.

4

Use the Navigation Pad to highlight your wireless network

SSID and then press the Center Selection Key.

 

Notes: If you do not see your wireless network SSID in the

 

list, your wireless network may not be set to broadcast the

 

SSID. Please refer to the User guide for more information on

 

how to set up wireless profile to connect to wireless network

5

manually.

The phone will automatically connect to the selected wireless

network.

5a. If WEP security is enabled on the selected network, a new screen will appear. Using the Navigation Pad, select the correct key index and move to the WEP Key field. Enter the network’s WEP key and then press the Center Selection Key.

YML873 V24W User Guide - 8

Image 9