NetComm V24W - page 39

Page 39

 

 

 

 

 

NetComm VoIP WiFi Phone V24W User Guide

 

 

2.

Access the Router’s Web-based Utility by going to http://192.168.1.1 or

 

 

 

the IP address of the Router.

 

 

 

 

3.

A login screen will appear. Leave the User Name field blank. Enter the

 

 

 

Router’s password (the default is admin) in the Password field. Then

 

 

 

click the OK button.

 

 

 

 

 

4.

Click the Applications & Gaming tab, and then click the Port Range

 

 

 

Forwarding tab.

 

 

 

 

 

5.

For each port range you must specify, enter a different name in the

 

 

 

Application field. Then enter the number or range of external port(s) used

 

 

 

by the IP Phone.

 

 

 

 

 

6.

Select the protocol you will be using, UDP.

 

 

7.

Enter the IP address of the IP Phone. For example, if the IP Phone’s IP

 

 

 

address is 192.168.1.100, you would enter 100 in the field provided.

 

 

8.

Repeat steps 5-7 until you have entered all four port ranges for the IP

 

 

 

Phone.

 

 

 

 

 

 

 

 

 

 

 

 

 

Application

 

Start and End

Protocol

 

IP Address

 

 

Enable Internet Phone 1

 

5060 to 5061

UDP

 

IP address of IP Phone

 

 

X Internet Phone 2

 

53 to 53

UDP

 

IP address of IP Phone

 

 

X Internet Phone 3

 

69 to 69

UDP

 

IP address of IP Phone

 

 

X Internet Phone 4

 

10000 to 20000

UDP

 

IP address of IP Phone

 

 

9.

Check the Enable option for the port services you want to use.

 

 

10.

When you have completed the configuration, click the Save Settings

 

 

 

button.

 

 

 

 

4. The power LED does not light up.

Go through this checklist until your problem is solved:

•Remove the IP Phone’s battery from its compartment. Wait five seconds while the IP Phone resets itself. Insert the battery and power on the IP Phone.

•You may be using the wrong power adapter. Make sure the power adapter you are using is the one included with the IP Phone.

YML873 V24W User Guide - 38

Image 39