NetComm VoIP WiFi Phone V24W User Guide
SIP Settings
The necessary setup information is supplied by your VoIP Service Provider. If you do not have this information, contact your VoIP Service Provider before making any changes. Press the Return soft key to return to the previous menu.
Refer to the table below for all SIP options.
Options | Description |
Proxy IP | To add or change the Proxy IP address |
Proxy Port | To add or change the Proxy Port number |
Register Proxy IP | To add or change the Register Proxy IP address |
Register Proxy Port | To add or change the Register Proxy Port number |
Outbound Proxy IP | To add or change the Outbound Proxy IP address |
Outbound Proxy Port | To add or change the Outbound Proxy Port number |
Expire Time | To change the Expire Time (default is 3600) |
Display Name | This is the message displayed on the receiver’s caller ID |
Phone Number | To add or change the Phone Number you will use for VoIP phone calls |
User Name | To add or change the User Name used for authentication with the |
| Registration Server |
Password | To add or change the password used in conjunction with the User Name |
| for authentication with the Registration Server |
Payload Type | G.711a, G.729, and G.711u are the three Payload Types available. They |
| are listed in order of preference. |
Packet Time | There are two Packet Length Time available; small and large. |
DTMF Relay. | To disable and enable the DTMF relay feature. |
UDP Port. | To add or change the UDP Port number. |
RTP Port. | To add or change the RTP Port number. |
Session Timer. | To add or change the Session Timer. Session Timer is the periodic |
| refresh of SIP sessions through a |
SIP Format | To change the SIP format (Default is Normal). The other 2 choices may |
| be used with certain SIP Proxy Servers. |
|
|
To add or change any settings, press the Edit soft key and enter the value in the prompt window. Press the Center Selection key to save it or press the Exit soft key to return to the previous screen.
For options with only choices, press the Edit soft key to scroll through the options list.
Press the Exit soft key to return to the SIP Setting screen.
YML873 V24W User Guide - 29