NetComm V24W Auto KeyLock Settings , Factory Default , Upgrade

Page 29

NetComm VoIP WiFi Phone V24W User Guide

Auto KeyLock Settings

If you want to automatically lock your keys after 10 seconds of inactivity, select Auto KeyLock Settings. Press the Edit soft key until Enable is displayed. To unlock your phone, press the left soft key (Unlock) and the asterisk (*) key.

TIP: To key lock your phone, press and hold the (#) key at the stand by screen.

Factory Default

Factory default will removes all configurations on the V24W phone. And it will bring the

V24W phone back to the factory default settings. Before selecting yes, make sure that you want to delete all data.

Upgrade

The Upgrade feature allows you to upgrade the firmware of the V24W Phone.

The IP Phone is pre-configured with the correct Download URL (web address of the download site) and OS Image File (firmware upgrade file) entries.

NOTE: Do not change these settings unless your VoIP Service Provider has given you new settings.

Plug the USB mini-B connector of the included power adapter into the USB mini-B port of the IP Phone. Then connect the power adapter to a standard electrical outlet.

NOTE: If the upgrade is interrupted, the V24W Phone will revert to its old firmware, and you can attempt the upgrade again.

Press the Upgrade soft key to start upgrading the V24W Phone’s firmware, or press the Return soft key to cancel the upgrade and return to the previous menu.

When the upgrade is complete, the V24W Phone will automatically power itself off. Wait five seconds and then power it back on.

NOTE: Please do not upgrade the firmware unless instructed by your provider or NetComm Technical Support.

YML873 V24W User Guide - 28

Image 29