NetComm V24W - page 25

Page 25

NetComm VoIP WiFi Phone V24W User Guide

Option

Refer to the table below for each option.

Option

Description

Edit

To edit the highlighted profile

Add

To add a profile

Delete

To delete the highlighted profile

Connect

To connect to the highlighted profile

Go Down / UP

To move the profile priority up / down

Save <Network Name>

To save the working wireless connection to a new profile

The Edit and Delete options are available when you have at least one existing profile, and the Go Down/UP is available when you have more than one existing profile.

Both the Edit and Add options have the same configuration settings. The Edit option will edit an existing profile and the Add option will add a new profile.

Edit and Add options.

Select Edit to edit a profile’s information or Add to add a new profile.

The following settings need to be set up for each profile.

•SSID. To change the SSID, press the Edit soft key and enter the new SSID in the prompt window. Press the center selection key to save the new information, or press the Exit soft key to return to the previous menu.

•Wireless Mode. There are two choices, Infrastructure and Ad hoc modes. To change the Wireless Mode, press the Edit soft key.

•Authentication Mode. The choices are: Share Key, Open System, and WPA- PSK. To change the Authentication Mode, press the Edit soft key and a new window will open. Scroll through the modes, and select the correct mode for the wireless access point. Press the Save soft key to save the new Authentication Mode, or press Exit soft key to return to the Edit Profile menu without changing the Authentication Mode.

-For Share Key, or Open System options, you need to configure the following:

•Encryption. There are two choices, Disabled and WEP encryption. To change the Encryption method, press the Edit soft key. If you select Disabled then there are no other settings to change. For WEP, there are two more settings available, Key Index and WEP Key.

•Key Index. This is the option for the Key Index Transmit. Choose the correct one for your wireless network. Press the Edit soft key to change it. A new window will open, scroll through the numbers,

and select the correct transmit key number. Press the Save soft key to save the new transmit key number, or press the Exit soft key to return to the Edit Profile menu without changing the number.

•WEP Key. To enter the WEP Key, press the Edit soft key. Enter the new WEP Key in the new prompt window and press the center selection key to save the new WEP Key. Press the Exit soft key to return to the Edit Profile menu without changing the key.

-For WPA-PSK, you need to configure the following:

•WPA Key. To enter the WPA Key, press the Edit soft key. Enter the new WPA Key in the new prompt window and press the center

YML873 V24W User Guide - 24

Image 25