GE 25865 manual Installing the Phone, Installing the Handset Battery, Battery Pack Black wire

Page 10

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before using the cordless handsets.

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. appoved Nickel-Cadmium (Ni-Cd) battery model 5-2548, which is compatible with this unit.

1.Locate battery and battery door which are packaged together inside a plastic bag and are separate from the handset.

2.Locate the battery compartment on the back of the handset.

3.Plug the battery pack cord into the jack inside the compartment.

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be inserted only one way.

battery

pack

black wire

PRESS DOWN

 

FIRMLY

red wire

 

4.Insert the battery pack.

5.Close the battery compartment by pushing the door up until it snaps into place.

6.Place the handsets in the charging cradles.

Allow handsets to charge for 16 hours prior to first use. If you don’t properly charge the handsets, battery performance is compromised.

10

Image 10
Contents Page Equipment Approval Information Notification to the Local Telephone CompanyLicensing Interference InformationHearing Aid Compatibility HAC FCC RF Radiation Exposure StatementTable of Contents Global De-registration Base Unit Before You Begin Parts ChecklistIntroduction Telephone Jack RequirementsImportant Installation Guidelines InstallationDigital Security System Handset Layout Base Layout Installing the Handset Battery Installing the PhoneBattery Pack Black wire Connecting the Base Station Installing the Base StationInstalling the Backup Batteries on Base Unit Wall Mounting the BaseUsing the Soft Keys Base Speakerphone Set UpSpeakerphone Volume Turning the Answerers On or OffBase Name Base Voice/Display Prompt LanguageBase Date/Time Tone/Pulse Base Ringers Base Ringer VolumeBase Set Local Area Codes From the Ringer MenuBase VIP Melody Tone Base Ringer ToneBase Key Tone Outgoing Announcement Answerer SetupFrom the Answerer Setup Menu Reviewing the Outgoing AnnouncementChanging the Outgoing Announcement Setting the Security CodeBase Ring To Answer Sample Outgoing AnnouncementSet Forwarding Messages Forwarding MessagesForwarding Messages ON/OFF View Unit ID Handset Telephone Set UpRecording Quality Number of RetriesHandset Display Prompt Language Handset Ringer VolumeHandset Ringers Handset VIP Melody Handset Ringer ToneHandset Key Tone Handset Name Handset RegistrationHandset Date/Time Handset Setting Local Area Codes Answering a Call Charge/In Use IndicatorBasic Operation Making a CallNumber Redial VolumeFlash MuteGlobal De-registration HoldPaging the Cordless Handset Room MonitorCall Transfer Making an Intercom Call Intercom OperationReceiving an Intercom Call Receiving an Incoming Call During an Intercom Call Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Two-Way Intercom CallsTransferring External Call to Other Handset or Base Call Waiting Caller ID Caller ID CIDReceiving CID Records Reviewing Call Records Storing CID Records In CID MemoryDialing a Caller ID Number Storing CID Records in Internal Memory Number of digits Explanation ExampleDeleting CID Records Press the 6 button to scroll to Enter NumberStoring a Name and Number in Memory MemoryStoring the Last Number Dialed Reviewing a Stored Number Inserting a Pause in the Dialing SequenceChanging a Stored Number Deleting Records Stored in Memory Dialing a Number from MemoryTransferring memory from the base to a handset Transferring MemoryChain Dialing from Memory Transferring memory from the handset to the baseScreening Calls from the Base Handset Messages IndicatorAnswering System Operation Message PlaybackHandset Memory FullErasing Messages To erase one message at a time from the baseTo erase all messages from the base Leaving a MemoTo erase a message from the handset Connecting an Optional Headset to the Handset Remote AccessConnecting the Belt Clip Belt Clip and Optional HeadsetChanging the Battery Battery Safety PrecautionsDisplay Messages Delete Call ID?Caller ID Solutions Handset Sound SignalsTroubleshooting Guide Telephone SolutionsBattery Solutions General Product Care Accessory InformationCauses of Poor Reception Service Limited WarrantyIf you purchased your product outside the USA Index Global De-registration Outgoing Announcement Parts Checklist Thomson Inc