GE 25865 manual Base Set Local Area Codes, Base Ringers, Base Ringer Volume, From the Ringer Menu

Page 15

6.Press the SELECT soft key to confirm.

7.Use the 5 or 6 buttons to select TONE or PULSE.

8.Press the DONE soft key to confirm.

Base - Set Local Area Codes

You can progrom the way the Caller ID records are displayed, for up to five different codes for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx, and etc.

1.Make sure your phone is OFF (not in talk mode).

2.Press the MENU soft key to go to the main menu.

3.Use the 5 or 6 buttons to scroll to LOC AREA CODE .

4.Press the SELECT soft key to confirm.

5.Press the FORMAT soft key to change the length of the CID records.

6.Use the touch-tone pad to enter your 3-digit area code.

7.Press the DONE soft key to confirm the selection.

Base Ringers

You may program the following items independently for LINE 1 and LINE 2 under the RINGER menu; Ringer Volume, Ringer Tone, Phonebook Tone (VIP) and Key Tone. To access the RINGER Menu:

1.Make sure your phone is OFF (not in talk mode).

2.Press the MENU soft key to go to the main menu.

3.Use the 5 or 6 buttons to scroll to RINGER.

4.Press the SELECT soft key to confirm.

5.Use the 5 or 6buttons tos to select LINE 1 or LINE 2 for setting line 1 or line 2.

6.Press the SELECT soft key to confirm.

Base Ringer Volume

From the Ringer Menu:

1.Use the 5 or 6 buttons to scroll to RINGER VOLUME.

2.Press the CHANGE soft key to select HIGH, MEDIUM, LOW or OFF.

3.Press the DONE soft key to confirm.

NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

15

Image 15

Contents Page Notification to the Local Telephone Company Equipment Approval InformationFCC RF Radiation Exposure Statement Interference InformationHearing Aid Compatibility HAC LicensingTable of Contents Global De-registration Base Unit Telephone Jack Requirements Parts ChecklistIntroduction Before You BeginInstallation Important Installation GuidelinesDigital Security System Handset Layout Base Layout Installing the Phone Installing the Handset BatteryBattery Pack Black wire Wall Mounting the Base Installing the Base StationInstalling the Backup Batteries on Base Unit Connecting the Base StationTurning the Answerers On or Off Base Speakerphone Set UpSpeakerphone Volume Using the Soft KeysBase Voice/Display Prompt Language Base NameBase Date/Time Tone/Pulse From the Ringer Menu Base Ringer VolumeBase Set Local Area Codes Base RingersBase Ringer Tone Base VIP Melody ToneBase Key Tone Reviewing the Outgoing Announcement Answerer SetupFrom the Answerer Setup Menu Outgoing AnnouncementSample Outgoing Announcement Setting the Security CodeBase Ring To Answer Changing the Outgoing AnnouncementForwarding Messages Set Forwarding MessagesForwarding Messages ON/OFF Number of Retries Handset Telephone Set UpRecording Quality View Unit IDHandset Ringer Volume Handset Display Prompt LanguageHandset Ringers Handset Ringer Tone Handset VIP MelodyHandset Key Tone Handset Registration Handset NameHandset Date/Time Handset Setting Local Area Codes Making a Call Charge/In Use IndicatorBasic Operation Answering a CallMute VolumeFlash Number RedialRoom Monitor HoldPaging the Cordless Handset Global De-registrationCall Transfer Intercom Operation Making an Intercom CallReceiving an Intercom Call Two-Way Intercom Calls Advanced Intercom FeaturesUsing Intercom with External Telephone Calls Receiving an Incoming Call During an Intercom CallTransferring External Call to Other Handset or Base Caller ID CID Call Waiting Caller IDReceiving CID Records Storing CID Records In CID Memory Reviewing Call RecordsDialing a Caller ID Number Number of digits Explanation Example Storing CID Records in Internal MemoryPress the 6 button to scroll to Enter Number Deleting CID RecordsMemory Storing a Name and Number in MemoryStoring the Last Number Dialed Inserting a Pause in the Dialing Sequence Reviewing a Stored NumberChanging a Stored Number Dialing a Number from Memory Deleting Records Stored in MemoryTransferring memory from the handset to the base Transferring MemoryChain Dialing from Memory Transferring memory from the base to a handsetMessage Playback Handset Messages IndicatorAnswering System Operation Screening Calls from the BaseTo erase one message at a time from the base Memory FullErasing Messages HandsetLeaving a Memo To erase all messages from the baseTo erase a message from the handset Belt Clip and Optional Headset Remote AccessConnecting the Belt Clip Connecting an Optional Headset to the HandsetBattery Safety Precautions Changing the BatteryDelete Call ID? Display MessagesTelephone Solutions Handset Sound SignalsTroubleshooting Guide Caller ID SolutionsBattery Solutions Accessory Information General Product CareCauses of Poor Reception Limited Warranty ServiceIf you purchased your product outside the USA Index Global De-registration Outgoing Announcement Parts Checklist Thomson Inc