GE 25865 manual Intercom Operation, Making an Intercom Call, Receiving an Intercom Call

Page 29

Intercom Operation

A two-way intercom is possible between the base and cordless handset(s) without tying up the telephone line and since the telephone line is not used, you can still receive incoming calls.

Making an Intercom Call

1.Make sure the phone is OFF (not in TALK mode).

2.Press the intercom button.

3.Use the 5 or 6 buttons to select the desired handset or base.

NOTE: If you only have one handset registered in the system, it is paged automatically.

4.Press the PAGE soft key.

5.The receiving handset or base is paged, and the receiving handsets or base emit a paging tone and the following information shows in the display:

PAGING

HANDSET 2

EXIT

Sending Handset/Base

PAGING FROM

HANDSET 1

OKEXIT

Receiving Handset/Base

When the OK soft key or intercom button on the receiving handset or base is pressed, the page is answered. If the page is not answered after two minutes, NO ANSWER shows in the display of sending handset or base and the page is cancelled. The unit returns to standby mode.

NOTE: If a personalized name is assigned to the handset during registration, then that name is displayed instead of handset number.

NOTE: To cancel the page, press the EXIT soft key or intercom key on the sending party.

Receiving an Intercom Call

When you receive an intercom call, the handset or base beeps. To answer the intercom call, press the OK soft key, the TALK/LINE1/flash1, TALK/LINE2/flash2 button or the intercom button.

29

Image 29

Contents Page Notification to the Local Telephone Company Equipment Approval InformationHearing Aid Compatibility HAC Interference InformationLicensing FCC RF Radiation Exposure StatementTable of Contents Global De-registration Base Unit Introduction Parts ChecklistBefore You Begin Telephone Jack RequirementsDigital Security System InstallationImportant Installation Guidelines Handset Layout Base Layout Battery Pack Black wire Installing the PhoneInstalling the Handset Battery Installing the Backup Batteries on Base Unit Installing the Base StationConnecting the Base Station Wall Mounting the BaseSpeakerphone Volume Base Speakerphone Set UpUsing the Soft Keys Turning the Answerers On or OffBase Date/Time Base Voice/Display Prompt LanguageBase Name Tone/Pulse Base Set Local Area Codes Base Ringer VolumeBase Ringers From the Ringer MenuBase Key Tone Base Ringer ToneBase VIP Melody Tone From the Answerer Setup Menu Answerer SetupOutgoing Announcement Reviewing the Outgoing AnnouncementBase Ring To Answer Setting the Security CodeChanging the Outgoing Announcement Sample Outgoing AnnouncementForwarding Messages ON/OFF Forwarding MessagesSet Forwarding Messages Recording Quality Handset Telephone Set UpView Unit ID Number of RetriesHandset Ringers Handset Ringer VolumeHandset Display Prompt Language Handset Key Tone Handset Ringer ToneHandset VIP Melody Handset Date/Time Handset RegistrationHandset Name Handset Setting Local Area Codes Basic Operation Charge/In Use IndicatorAnswering a Call Making a CallFlash VolumeNumber Redial MutePaging the Cordless Handset HoldGlobal De-registration Room MonitorCall Transfer Receiving an Intercom Call Intercom OperationMaking an Intercom Call Using Intercom with External Telephone Calls Advanced Intercom FeaturesReceiving an Incoming Call During an Intercom Call Two-Way Intercom CallsTransferring External Call to Other Handset or Base Receiving CID Records Caller ID CIDCall Waiting Caller ID Dialing a Caller ID Number Storing CID Records In CID MemoryReviewing Call Records Number of digits Explanation Example Storing CID Records in Internal MemoryPress the 6 button to scroll to Enter Number Deleting CID RecordsStoring the Last Number Dialed MemoryStoring a Name and Number in Memory Changing a Stored Number Inserting a Pause in the Dialing SequenceReviewing a Stored Number Dialing a Number from Memory Deleting Records Stored in MemoryChain Dialing from Memory Transferring MemoryTransferring memory from the base to a handset Transferring memory from the handset to the baseAnswering System Operation Handset Messages IndicatorScreening Calls from the Base Message PlaybackErasing Messages Memory FullHandset To erase one message at a time from the baseTo erase a message from the handset Leaving a MemoTo erase all messages from the base Connecting the Belt Clip Remote AccessConnecting an Optional Headset to the Handset Belt Clip and Optional HeadsetBattery Safety Precautions Changing the BatteryDelete Call ID? Display MessagesTroubleshooting Guide Handset Sound SignalsCaller ID Solutions Telephone SolutionsBattery Solutions Causes of Poor Reception Accessory InformationGeneral Product Care Limited Warranty ServiceIf you purchased your product outside the USA Index Global De-registration Outgoing Announcement Parts Checklist Thomson Inc