Geemarc T300 manual General Settings, HOW to Connect the Phone and SET the Batteries

Page 8

GENERAL SETTINGS

1 - HOW TO CONNECT THE PHONE AND SET THE BATTERIES

1 - Plug the adaptor in the power wall socket and the power plug in the base socket (*).

2 - Connect the line cord plug to the base socket (**).

3 - Connect the line cord to the PTT socket.

4 - Insert the batteries with the correct polarity into the batteries compartment and replace the battery cover.

5 - Place the handset on the base unit then a short beep will be heard and the battery symbol will flash on the display, except if the batteries are totally empty.

NOTE: Do not expose the base to electric equipment like TV, radio, monitors, sunlight, heat or other phones...to avoid any disturbances of your phone.

(**) Classified TNV-3 according to EN60950 standard.

(*) Classified “hazardous voltage” according to EN60950 standard

2 - CHARGING THE BATTERIES

The phone is supplied with NiMH rechargeable batteries. In standby mode, batteries are fully charged around 170 hours and talk time is around 8 hours.

The battery charge icon will flash as long as the phone is being charged and will stop when the charging process is complete. The phone has an automatic charging control to avoid excessive charging.

IMPORTANT: Batteries must be charged during 24 hours before using the phone for the first time.

Battery charge icon:

The handset display shows when the batteries are flat and when a warning signal is heard. If the phone does not have enough power or is not completly recharged, it switches itself off automatically until it is returned to the base unit.

8

Image 8

Contents Ampli DECT300 Index Additional Base Unit Description Description Base Controls Controles SUR LA Base Base Connections Connections SUR LA Base General Settings HOW to Connect the Phone and SET the BatteriesBattery charge icon Charging the BatteriesClean the Phone Phone RangeSymbol Function Base SettingsBase Ringer Volume Handset Settings Menu AccessSetting Icons Displayed on the Handset Handset RegistrationHandset Ringer VOLUME, Melody and Shaker Earpiece Volume Setting and Tone AdjustNetwork FEATURES, Flash TIME, Dial Pause Using the Phone Making a CallFrom the keypad Answering a CallUSE the Call Back Features TimerDelete Stored Names and Numbers Paging the HandsetAbout the Phone Book Phone Book Melodies SettingsPhone Book Storing a Number with a Name Key CharactersDelete a Phone Book Entry Dialling Using the Phone BookModify a Phone Book Entry Store Numbers and Names Into the Phone Book Answering Machine general icons displayed Answering MachineAnswering Machine Programming Options Record an Outgoing Message HOW to USE the Answering MachineAccessing/Exit the Answering Machine Record an Incoming Message Reading messagesDelete a message Delete all messagesAnswering Machine Remote Control To remotely access to the answering machineTo remotely activate the answering machine To remotely deactivate the answering machineGeneral Settings Using Several Handsets RegistrationHow to use several handsets Additional HandsetsDeregister ALL Additional Handsets from the Base Internal CallsCall Transfer to Another Registered Handset Headset Neck Loop OptionHOW to ADD a Base Unit Additional Base UnitTrouble Shooting If the Phone does not WorkYou lost some messages Re-Initialize the phoneGUARANTEE-NORMS GuaranteeSommaire Base Additionnelle Installation Raccordement DU Telephone ET Mise EN Place DES BatteriesChargement DES Batteries Affichage du niveau de chargement de la batterieRayon D’ACTION Entretien DU TelephoneReglage DE LA Base Reglage DU Volume DE SonnerieSymbole Niveau Acces AU MENU, Deplacement Presentation DES SymbolesReglage DU Combine Enregistrement DU Combine SUR LA BaseVOLUME, Melodie DE LA Sonnerie ET Vibreur Annuler L’ENREGISTREMENT D’UN Combine SUR LA BaseReglage DU Volume DE L’ECOUTEUR ET DE LA Tonalite Proprietes DU RESEAU, Touche R FLASH, Insertion D’UNE Pause Depuis le journal des appels AppelerDepuis le clavier Rappeler LE Dernier Numero Compose BIS Repondre a UN AppelAffichage du nom et du numéro Effacer UN OU Plusieurs Numeros DU Journal D’APPELS Recherche DU Combine PaginationPartir de la base s’il se situe dans le rayon d’action Minuterie Duree DES AppelsDescription Melodie Affectee AU RepertoireTouche Lettre/symbole Enregistrement D’UN Numero ET D’UN NOMEffacer UN NOM DU Repertoire ET SON Numero Appeler EN Utilisant LE RepertoireModifier UN Numero DU Repertoire Transfert DE Numeros DU Journal D’APPELS Vers LE Repertoire Programmation DU Repondeur Présentation des icônes du répondeurUtilisation DU Repondeur Accéder ou sortir du répondeurActiver le répondeur Desactiver le répondeurLire les messages Enregistrer un message d’accueilEnregistrer un mémo Effacer un message Effacer tous les messagesACTIVER-DESACTIVER LE Repondeur a Distance Activer le répondeur à distanceInterroger Votre Repondeur a Distance Utilisation DE Plusieurs Combines enregistrements Combines AdditionnelsGeneralites Communications Internes Transfert D’APPEL Option CASQUE- Boucle MagnetiqueBase Additionnelle Ajouter UNE Base SupplementaireEN CAS DE Probleme Problemes DE FonctionnementReinitialiser Votre DECT300 AUX Parametres Usine Cela ne ré-initialise que les paramètres du combinéParc de l’Etoile 2, rue Galilée 59760 Grande Synthe Garantie NormesGarantie