Grandstream Networks 200 Series user manual Display 10 Phy Addr

Menu Item	Menu Functions
10	Display “[10] Phy Addr”
	Press MENU to display the physical / MAC address
	Press ‘↓’ or ’↑’ to exit
	Display “[11] ring 0”
	Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the
11	stored ring tones. Now only 3 are available, ring 0 (default), ring 1 and ring
	2. ring 3 is unavailable or unsupported.
	Press MENU to select and exit
	Display “ -- rESEt --”, please be very CAREFUL here
	• Key in the physical / MAC address on back of the phone, Press
	MENU, phone will be reset to FACTORY DEFAULT setting, and
	all your setting will be erased.
	• Press MENU key without key in anything, phone will function the
	same as power cycle or reboot
	When phone is powered on and time is displayed
	• Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear
	and adjust the ring tone volume, from 0 (off) to 7 (maximum), off
Others	and on hook to set
	• Press “SPEAKERPHONE” button, or off hook and pick up
	handset, press ‘↓’ or ’↑’ to adjust the speakerphone/headset or
	handset volume

23