Grandstream Networks 200 Series Firmware Upgrade, Upgrade through Http, Upgrade through Tftp

Page 44

6 Firmware Upgrade

6.1Upgrade through HTTP

To upgrade software, BudgeTone 200 can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server:

http://firmware.mycompany.com:6688/Grandstream/1.0.1.12

Where firmware.mycompany.com is the FQDN of the HTTP server, “:6688” is the TCP port the HTTP server listening to, “/Grandstream/1.0.0.4” is the RELATIVE directory to the root dir in HTTP server. Thus, you can put different firmware into different directory as well.

NOTE:

•If “Auto Upgrade” field is set to “No”, HTTP upgrade will be performed only once during boot up. If it is set to “Yes”, the device will check the HTTP server in the number of days that is defined in “Check for new firmware every” field.

6.2Upgrade through TFTP

To upgrade software, BudgeTone 200 can be configured with a TFTP server where the new code image is located. It is recommended to set the TFTP server address in either a public IP address or on the same LAN with the BudgeTone 200.

There are two ways to set up the TFTP server to upgrade the firmware, namely through voice menu prompt or via the BudgeTone 200’s Web configuration interface. To configure the TFTP server via voice prompt, please refer to section 5.1 with option 06, once set up the TFTP IP address, power cycle the device, the firmware will be fetched once the device boots up.

To configure the TFTP server via the Web configuration interface, open up your browser to point at the IP address of the BudgeTone 200. Input the admin password to enter the configuration screen. From there, enter the TFTP server address in the designated field

towards the bottom of the configuration screen. Once the TFTP server is set, user needs to update the change by clicking the “Update” button. Then “Reboot” or power cycle the phone, the firmware files will be fetched upon booting up.

TFTP checking is only performed during the initial power up. If the configured TFTP server is found and a new code image is available, the BudgeTone 200 will attempt to

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Grandstream Networks, Inc For Firmware VersionTable of Contents Using BUDGETONE-200 IP PhoneRestore Factory Default Setting Appendix I Glossary of Terms Welcome Connecting Your Phone InstallationWhat is Included in the Package Safety Compliances WarrantyPage Product Overview Key Features Software FeaturesHardware Features Hardware Specification Model BudgeTone-200Icon LCD Icon Definitions Using BudgeTone-200 IP PhoneGetting Familiar with LCD / LED Page Getting Familiar with Keypad Menu CalledCallers MessageHandset, Speakerphone and Headset Mode Make Calls using NumbersMaking and Answering Phone Calls SEND/REDIALMake Calls using IP Address Answer an Incoming CallMENUkey 192 168 000 MENUkey 192168001020*45062Handset Mode, Speakerphone/Headset Mode Call HoldCall Waiting and Call Flashing Call TransferAttended Transfer Conference CallChecking Message and Message Waiting Indication Call Features Mute and DeleteMenu Item Menu Functions Configuration GuideConfiguration with Keypad Display 7 G-711u Display 10 Phy Addr End User Configuration Configuration with Web BrowserAccess the Web Configuration Menu Grandstream Device Configuration Status Basic Advanced Account SettingsEnd User Password IP Address Time Zone DaylightWAN MAC LAN DhcpDhcp IP DMZ IPPassword Device ModeWAN side http access End UserPPPoE Link Up disabled Product Model BT200Cloned WAN MAC Addr LAN Dhcp Base IPAdvanced User Configuration Account Settings Status BasicAutomatic Upgrade Admin Timeout Use # asSilence SuppressionUpgrade Local RTPPort Use RandomDtmf Disable Call UpdateOption 42 to Override NTPAuthenticate ID Authenticate PasswordAccount Active Account Name MyCompanyAuto Answer Individual Account Settings Account NameSIP Server SIP User IDMWI Enable Call FeaturesDisable Missed-Call TimerEnable 100rel Special FeatureUAS Specify Force InviteSaving the Configuration Changes Rebooting the Phone from RemoteConfiguration through Central Provisioning Server Upgrade through Tftp Firmware UpgradeUpgrade through Http Page Restore Factory Default Setting StepAppendix I Glossary of Terms DNS DidDSP FqdnEcho Cancellation FXOFXS DhcpHttp IP-PBXIVR MTUNAT NTPOBP/SBC PstnSDP SIPStun TCPVlan VoIP
Top Page Image Contents