Update |
All Rights Reserved Grandstream Networks, Inc. 2004, 2005
|
|
|
|
|
| End User |
| This contains the password to access the Web Configuration Menu. |
|
| Password |
| This field is case sensitive with a maximum length of 25 characters. |
|
|
|
|
|
|
|
|
|
|
|
| IP Address |
| There are two modes under which the BudgeTone 200 can operate: |
|
|
|
| • If DHCP mode is enabled, then all the field values for the Static |
|
|
|
| IP mode are not used (even though they are still saved in the |
|
|
|
| Flash memory.) The BudgeTone 200 will acquire its IP address |
|
|
|
| from the first DHCP server it discovers from the LAN it is |
|
|
|
| connected. |
|
|
|
| • To use the PPPoE feature the PPPoE account settings need to |
|
|
|
| be set. The BudgeTone 200 will attempt to establish a PPPoE |
|
|
|
| session if any of the PPPoE fields is set. |
|
|
|
| • If Static IP mode is enabled, then the IP address, Subnet Mask, |
|
|
|
| Default Router IP address, DNS Server 1 (primary), DNS |
|
|
|
| Server 2 (secondary) fields will need to be configured. These |
|
|
|
| fields are set to zero by default. |
|
|
|
|
|
|
|
|
|
|
|
| Time Zone |
| This parameter controls how the date/time is displayed according to the |
|
|
|
| specified time zone. |
|
|
|
|
|
|
|
|
|
|
|
| Daylight Savings Time |
| This parameter controls whether the time will be displayed in daylight |
|
|
|
| savings time or not. If set to “Yes”, then the displayed time will be 1 |
|
|
|
| hour ahead of normal time. |
|
|
|
|
|
|
|
|
|
|
|
| Date Display Format |
| Allow user to choose among the following three formats: |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Device Mode |
| This parameter controls whether the device is working in NAT router |
|
|
|
| mode or Bridge mode. Need save the setting and reboot the device |
|
|
|
| before the setting start to work. |
|
|
|
|
|
|
|
|
|
|
|
| WAN side http access |
| If set to “Yes”, user can access the configuration page through the |
|
|
|
| WAN port, instead of connecting PC and GXP2000 through the “PC” |
|
|
|
| port to do the configuration. On the other hand, it exposes the |
|
|
|
| GXP2000 to others, and may cause some security issues for users. |
|
|
|
| Default is No. |
|
|
|
|
|
|
|
|
|
|
|
| Reply to ICMP on WAN port |
| If set to “Yes”, The GXP2000 will respond to the PING command |
|
|
|
| from other computers for testing, but it also is vulnerable to the DOS |
|
|
|
| attack. Default is No. |
|
|
|
|
|
|
27