Grandstream Networks 200 Series Configuration with Web Browser, Access the Web Configuration Menu

Page 24

5.2Configuration with Web Browser

BudgeTone 200 series IP phone has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the IP phone through a Web browser such as Microsoft’s IE.

5.2.1 Access the Web Configuration Menu

The IP Phone Web Configuration Menu can be accessed by the following URI:

http://Phone-IP-Address

where the Phone-IP-Addressis the IP address of the phone.

When the phone is on-hook,press Menu button and then select the Status item to see “IP: IP Address

NOTE:

To type IP address into browser to get into the configuration page, please strip out the leading “0” as the browser will parse in octet. e.g.: if the IP address is: 192.168.001.014, please type in: 192.168.1.14.

5.2.2 End User Configuration

Once this HTTP request is entered and sent from a Web browser, the BudgeTone 200 will respond with the following login screen:

Grandstream Device Configuration

Password

Login

All Rights Reserved Grandstream Networks, Inc. 2004

24

Image 24
Contents Grandstream Networks, Inc For Firmware VersionTable of Contents Using BUDGETONE-200 IP PhoneRestore Factory Default Setting Appendix I Glossary of Terms Welcome Installation What is Included in the PackageConnecting Your Phone Safety Compliances WarrantyPage Product Overview Key Features Software FeaturesHardware Features Hardware Specification Model BudgeTone-200Using BudgeTone-200 IP Phone Getting Familiar with LCD / LEDIcon LCD Icon Definitions Page Getting Familiar with Keypad Menu CalledCallers MessageHandset, Speakerphone and Headset Mode Make Calls using NumbersMaking and Answering Phone Calls SEND/REDIALMake Calls using IP Address Answer an Incoming CallMENUkey 192 168 000 MENUkey 192168001020*45062Handset Mode, Speakerphone/Headset Mode Call HoldCall Waiting and Call Flashing Call TransferConference Call Checking Message and Message Waiting IndicationAttended Transfer Call Features Mute and DeleteConfiguration Guide Configuration with KeypadMenu Item Menu Functions Display 7 G-711u Display 10 Phy Addr Configuration with Web Browser Access the Web Configuration MenuEnd User Configuration Grandstream Device Configuration Status Basic Advanced Account SettingsEnd User Password IP Address Time Zone DaylightWAN MAC LAN DhcpDhcp IP DMZ IPPassword Device ModeWAN side http access End UserPPPoE Link Up disabled Product Model BT200Cloned WAN MAC Addr LAN Dhcp Base IPAdvanced User Configuration Account Settings Status BasicAutomatic Upgrade Admin Timeout Use # asSilence SuppressionUpgrade Local RTPPort Use RandomDtmf Disable Call UpdateOption 42 to Override NTPAuthenticate ID Authenticate PasswordAccount Active Account Name MyCompanyAuto Answer Individual Account Settings Account NameSIP Server SIP User IDMWI Enable Call FeaturesDisable Missed-Call TimerEnable 100rel Special FeatureUAS Specify Force InviteSaving the Configuration Changes Rebooting the Phone from RemoteConfiguration through Central Provisioning Server Firmware Upgrade Upgrade through HttpUpgrade through Tftp Page Restore Factory Default Setting StepAppendix I Glossary of Terms DNS DidDSP FqdnEcho Cancellation FXOFXS DhcpHttp IP-PBXIVR MTUNAT NTPOBP/SBC PstnSDP SIPStun TCPVlan VoIP