Grandstream Networks 200 Series user manual Grandstream Device Configuration, Daylight

Page 25

The password is case sensitive with maximum length of 25 characters and the factory default password for End User is “123”.

After a correct password is entered in the login screen, the embedded Web server inside the BudgeTone 200 will respond with the Configuration page which is explained in details below.

		Grandstream Device Configuration

	STATUS	BASIC	ADVANCED	ACCOUNT
	STATUS	SETTINGS	SETTINGS	ACCOUNT
		SETTINGS	SETTINGS

End User Password:

IP Address:

Time Zone:

(purposely not displayed for security protection)

dynamically assigned via DHCP (default) or PPPoE

(will attempt PPPoE if DHCP fails and following is non-blank)

PPPoE account ID:

PPPoE password:

Host name (Option 12):

Domain name (Option 15):

Vendor Class ID (Option 60):

	Preferred DNS server:					.		.				.
	Preferred DNS server:					.		.				.

			statically configured as:

				IP Address:				192		.		168		.	0	.	160
										.				.		.
				Subnet Mask:				0		.		0		.	0	.	0
										.				.		.
				Default Router:				0		.		0		.	0	.	0
										.				.		.
				DNS Server 1:				0		.		0		.	0	.	0
										.				.		.
				DNS Server 2:				0		.		0		.	0	.	0
										.				.		.

		GMT-7:00 (US Mountain Time, Denver)
		GMT-7:00 (US Mountain Time, Denver)

Allow DHCP Option 2 to override Time Zone setting:

No Yes

Daylight		No		Yes (if set to Yes, display time will be 1 hour ahead of

25

Image 25

Contents For Firmware Version Grandstream Networks, IncUsing BUDGETONE-200 IP Phone Table of ContentsRestore Factory Default Setting Appendix I Glossary of Terms Welcome What is Included in the Package InstallationConnecting Your Phone Warranty Safety CompliancesPage Product Overview Software Features Key FeaturesHardware Features Model BudgeTone-200 Hardware SpecificationGetting Familiar with LCD / LED Using BudgeTone-200 IP PhoneIcon LCD Icon Definitions Page Getting Familiar with Keypad Called MenuCallers MessageMake Calls using Numbers Handset, Speakerphone and Headset ModeMaking and Answering Phone Calls SEND/REDIALAnswer an Incoming Call Make Calls using IP AddressMENUkey 192 168 000 MENUkey 192168001020*45062Call Hold Handset Mode, Speakerphone/Headset ModeCall Waiting and Call Flashing Call TransferChecking Message and Message Waiting Indication Conference CallAttended Transfer Mute and Delete Call FeaturesConfiguration with Keypad Configuration GuideMenu Item Menu Functions Display 7 G-711u Display 10 Phy Addr Access the Web Configuration Menu Configuration with Web BrowserEnd User Configuration Status Basic Advanced Account Settings Grandstream Device ConfigurationEnd User Password IP Address Time Zone DaylightLAN Dhcp WAN MACDhcp IP DMZ IPDevice Mode PasswordWAN side http access End UserProduct Model BT200 PPPoE Link Up disabledCloned WAN MAC Addr LAN Dhcp Base IPAdvanced User Configuration Status Basic Account SettingsAutomatic Upgrade Timeout Use # as AdminSilence SuppressionLocal RTP UpgradePort Use RandomDtmf Update Disable CallOption 42 to Override NTPAuthenticate Password Authenticate IDAccount Active Account Name MyCompanyAuto Answer Account Name Individual Account SettingsSIP Server SIP User IDMWI Features Enable CallDisable Missed-Call TimerSpecial Feature Enable 100relUAS Specify Force InviteRebooting the Phone from Remote Saving the Configuration ChangesConfiguration through Central Provisioning Server Upgrade through Http Firmware UpgradeUpgrade through Tftp Page Step Restore Factory Default SettingAppendix I Glossary of Terms Did DNSDSP FqdnFXO Echo CancellationFXS DhcpIP-PBX HttpIVR MTUNTP NATOBP/SBC PstnSIP SDPStun TCPVoIP Vlan