Grandstream Networks 200 Series user manual Safety Compliances, Warranty

Page 6

The table below describes the connectors on the BudgeTone-200 phone:

	LAN		10/100 Switch LAN port for connecting to
	LAN		Ethernet.
			Ethernet.


	PC		10/100 Switch port for connecting PC


	POWER		5V power port


	HEADSET		2.5mm Headset port

2.3 Safety Compliances

The BudgeTone-200 phone is compliant with various safety standards including FCC/CE. Its power adaptor is compliant with UL standard. The phone should only be operated with the universal power adaptor provided with the package. Damages to the phone caused by using other unsupported power adaptors are not covered by the manufacturer’s warranty.

2.4 Warranty

Grandstream has a reseller agreement with our reseller customer. End user should contact the company from whom you purchased the product for replacement, repair or refund.

If you purchased the product directly from Grandstream, contact your Grandstream Sales and Service Representative for a RMA (Return Materials Authorization) number.

Grandstream reserves the right to remedy warranty policy without prior notification.

6

Image 6

Contents Grandstream Networks, Inc For Firmware VersionTable of Contents Using BUDGETONE-200 IP PhoneRestore Factory Default Setting Appendix I Glossary of Terms Welcome Installation What is Included in the PackageConnecting Your Phone Safety Compliances WarrantyPage Product Overview Key Features Software FeaturesHardware Features Hardware Specification Model BudgeTone-200Using BudgeTone-200 IP Phone Getting Familiar with LCD / LEDIcon LCD Icon Definitions Page Getting Familiar with Keypad Callers MenuCalled MessageMaking and Answering Phone Calls Handset, Speakerphone and Headset ModeMake Calls using Numbers SEND/REDIALMENUkey 192 168 000 Make Calls using IP AddressAnswer an Incoming Call MENUkey 192168001020*45062Call Waiting and Call Flashing Handset Mode, Speakerphone/Headset ModeCall Hold Call TransferConference Call Checking Message and Message Waiting IndicationAttended Transfer Call Features Mute and DeleteConfiguration Guide Configuration with KeypadMenu Item Menu Functions Display 7 G-711u Display 10 Phy Addr Configuration with Web Browser Access the Web Configuration MenuEnd User Configuration End User Password IP Address Time Zone Grandstream Device ConfigurationStatus Basic Advanced Account Settings DaylightDhcp IP WAN MACLAN Dhcp DMZ IPWAN side http access PasswordDevice Mode End UserCloned WAN MAC Addr PPPoE Link Up disabledProduct Model BT200 LAN Dhcp Base IPAdvanced User Configuration Account Settings Status BasicAutomatic Upgrade Silence AdminTimeout Use # as SuppressionPort UpgradeLocal RTP Use RandomDtmf Option 42 to Disable CallUpdate Override NTPAccount Active Authenticate IDAuthenticate Password Account Name MyCompanyAuto Answer SIP Server Individual Account SettingsAccount Name SIP User IDMWI Disable Missed-Call Enable CallFeatures TimerUAS Specify Enable 100relSpecial Feature Force InviteSaving the Configuration Changes Rebooting the Phone from RemoteConfiguration through Central Provisioning Server Firmware Upgrade Upgrade through HttpUpgrade through Tftp Page Restore Factory Default Setting StepAppendix I Glossary of Terms DSP DNSDid FqdnFXS Echo CancellationFXO DhcpIVR HttpIP-PBX MTUOBP/SBC NATNTP PstnStun SDPSIP TCPVlan VoIP